Clock spring problems

[solomon_2019Rebel]

68528300AA

Thank you!

 

[DRam74]

For a 21 bighorn with heated steering, it was 68545657AB. Make sure you get one ending in ab since there is a recall on aa ones. This is complete combo switch with clockspring.

 

[Rebel-4x4]

For a 21 bighorn with heated steering, it was 68545657AB. Make sure you get one ending in ab since there is a recall on aa ones. This is complete combo switch with clockspring.

I wonder if thats my issue. I lost all all power to my left hand steering switch and rear buttons. I ordered a new clock spring and still not working. I wonder if it was the wrong clock spring that rockauto supplied.

 

[Rebel-4x4]

Thank you!

https://www.moparwholesaleparts.com/oem-parts/mopar-multi-function-switch-68545658ab?c=Zz1lbGVjdHJpY2FsJnM9c3BlZWQtY29udHJvbCZsPTImbj1Bc3NlbWJsaWVzIFBhZ2UmYT1yYW0mbz0xNTAwJnk9MjAyMSZ0PXJlYmVsJmU9My0wbC12Ni1kaWVzZWw%3D

 

[solomon_2019Rebel]

Thanks for the updated info and for the link!

 

[DRam74]

The one for heated steering will work and is much cheaper ($60), I think because of the recall. You just wouldn’t have a connector to plug in to the heated steering connection on the wheel side. I had both of them side by side and the rest the same, when I added heated steering.

https://www.moparwholesaleparts.com/oem-parts/mopar-multi-function-switch-68545657ab

 

[TheLion]

Do you any of you have the part number for the clock spring? I tried using the one listed on the actual part and a search comes up with nothing. I just installed a new steering wheel and fear I may have damaged the clock spring. All functions work fine, no airbag light, just making a crinkling sound. And yes my truck needs an alignment, the steering wheel is not centered.


View attachment 198691
2019 Ram Rebel 4x4 Crew
5.7 Etorque
Suspension Leveling Kit
18” Method Wheels
35” K02s
Borla Atak exhaust

 

[TheLion]

After seeing your steering wheel, which is by the way very cool. I went a head and got myself a similar one. I did the replacement myself , but I'm having this clicking noise but everything else works as should be. Did you figure out how to correct the installation so there is no clicking noise, or are you ignoring it ? if so, did you have any issues ? Thanks