5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

Cargo Glide Bed Slide Installed

ScottishRAM

Member
Joined
Jan 10, 2020
Messages
22
Reaction score
27
Latest mod installed is the Cargo Glide CG1500 cargo slide. I call it my old man accessory cause I don't have to jump in to reach stuff. Added the wrap-around 6" sides and 2- slide in dividers. Works great. It does use up 4.5" of usable height from the bed deck but I can always open the tonneau if need be.


IMG_2836.jpg IMG_2838.jpg IMG_2835.jpg IMG_2837.jpg
 
Last edited:

djjr50

Active Member
Joined
Dec 23, 2019
Messages
198
Reaction score
57
Que interesante!

Looks like they left room on the sides. What's the weight capacity?
 

ScottishRAM

Member
Joined
Jan 10, 2020
Messages
22
Reaction score
27
Hey DJJR50 - The capacity of the CG1500 is 1,500 pounds. So, the weight of the bed slide is about 200 lbs plus the full load capacity of the slide itself of 1,500 lbs is just about the payload capacity of the loaded rate of the truck bed of 1,770 lbs. There are about 9" on either side of the slide. Its a real back saver. The slide locks in place at about 5 positions of extension and the dividers slide to an infinite number of positions. We have even used it as a picnic table at the park. I love it!
 

Users who are viewing this thread

Top