I've searched 100 threads and can't find an answer. i have a bighorn 4x4 that needs new tires. I have a leveling kit that i haven't installed yet but found a killer deal on some 35's. I know i will have a little rubbing but will a 35/12.5/20 fit on a non leveled truck for a little while till i get the leveling kit on?
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Can 35's fit non leveled
- Thread starter nickplmr4
- Start date
Rammit
Ram Guru
I have 35x11.50 with a 2” lift on an off-road package truck (3” overall), and I still get rubbing on inner fender liners at full lock. I know someone out there will say it will fit, but I wouldn’t do it with out at least a level
clazer
Well-Known Member
- Joined
- Feb 21, 2019
- Messages
- 297
- Reaction score
- 210
- Points
- 43
- Age
- 39
100% agree. If you have off-road group, less trimming probably, but you aren’t going to just bolt on and go.
Yes they fit with rub and grind. Dont stuff. Also be aware of tire weight. Smaller or larger can mean + - 8#.
285 65r20 Nitto Terra Grappler G2
I have a longhorn Air ride, No lift, No level. I read a lot of reviews, and posts on tire size and what fits and what does not. I live in MN so I see plenty of snow and we drive cross country often so I was looking for a good balance on what we could have for excellent winter and still cruise...
5thgenrams.com
these actually measure 34.5 no level, no lift..
LNDRCKT
Active Member
I’m running 35’s on a level with 1.5” wheel spacers. They will rub, but you can fix that with a heat gun. You don’t really need the level to make it work. I can run in entry/exit mode (air suspension) without any rubbing. Just keep in mind that each truck can be slightly different in how they will fit. Side to side may even fit differently.
