If I go into settins and remove the checkmark then put it back on for Camera Delay, it works as expected. (After changing from Reverse to Drive, the camera comes on for 10 seconds) After some unknown period of time, it stops working even though the checkmark is still there. Remove and re-check, and it works again. Clearly a software problem. Is it known, and does anyone know when a fix will be provided? Do I need to contact Service to diagnose something so obvious?
Also, is there any way to actually get suggestions to be considered? The front camera should stay active until the speed defined for surround view is reached, not just for 10 seconds. Occasionally, slow maneuvering -- or waiting for someone standing in my parking space! -- takes longer than the 10 seconds. I don't see any reason for a time delay on this option, but speed control when surround camera is activated.
UConnect is up to date.
Also, is there any way to actually get suggestions to be considered? The front camera should stay active until the speed defined for surround view is reached, not just for 10 seconds. Occasionally, slow maneuvering -- or waiting for someone standing in my parking space! -- takes longer than the 10 seconds. I don't see any reason for a time delay on this option, but speed control when surround camera is activated.
UConnect is up to date.