charley0667
New Member
- Joined
- Jul 19, 2023
- Messages
- 4
- Reaction score
- 0
What's up everyone,
I have had no success anywhere else so hopefully someone can help me here. I have had the BSOD and an alternating fuzzy screen along with my radio/satellite/bluetooth cutting out for some time. Below is what I have done so far
- Truck - 2020 Ram 2500
- Replaced the radio (part number 68422051AD - over $1,000) - No more fuzzy screen or cutting out but I do still have the BSOD on all the time.
- Replaced the backup camera (part number 04672735AD)
- Tested the connection from the radio to the backup camera using an ohms meter (I do not have the special tool #9977-6-8)
- Checked all fuses
- STILL getting BSOD
- Only code I am pulling is the B156D-00 LVDS (Low Voltage Differential Signal) video cable
Two things, when I purchased this radio from Dodge I contacted the parts guy back up and told him the supposed fix didn't work. He asked did I receive my pin number with the radio and I told him no. So I had to pull it back out, and send over the serial number along with my VIN to a different guy who gave me a pin. I then asked him what am I supposed to do with it and he really didn't have an answer. It never asked for a pin when I installed it and when I hook our computer up to it there is no option to add a pin or even relearn/reprogram the new radio. The other thing is, I am not sure if just using an ohms meter on the coax is good enough, I am thinking I might still be getting power and also having an issue at the same time.
Any help would be appreciated I have been dealing with this for over 6 months and all the dealerships I have called are a month out. It wouldn't be that big of an issue but I travel full time pulling a 14K trailer. Thanks!
I have had no success anywhere else so hopefully someone can help me here. I have had the BSOD and an alternating fuzzy screen along with my radio/satellite/bluetooth cutting out for some time. Below is what I have done so far
- Truck - 2020 Ram 2500
- Replaced the radio (part number 68422051AD - over $1,000) - No more fuzzy screen or cutting out but I do still have the BSOD on all the time.
- Replaced the backup camera (part number 04672735AD)
- Tested the connection from the radio to the backup camera using an ohms meter (I do not have the special tool #9977-6-8)
- Checked all fuses
- STILL getting BSOD
- Only code I am pulling is the B156D-00 LVDS (Low Voltage Differential Signal) video cable
Two things, when I purchased this radio from Dodge I contacted the parts guy back up and told him the supposed fix didn't work. He asked did I receive my pin number with the radio and I told him no. So I had to pull it back out, and send over the serial number along with my VIN to a different guy who gave me a pin. I then asked him what am I supposed to do with it and he really didn't have an answer. It never asked for a pin when I installed it and when I hook our computer up to it there is no option to add a pin or even relearn/reprogram the new radio. The other thing is, I am not sure if just using an ohms meter on the coax is good enough, I am thinking I might still be getting power and also having an issue at the same time.
Any help would be appreciated I have been dealing with this for over 6 months and all the dealerships I have called are a month out. It wouldn't be that big of an issue but I travel full time pulling a 14K trailer. Thanks!