Best Leveling Kit (No spacers)

[nestorrr_g]

Hi Everyone,
I am looking to level my 2020 Rebel 4x4 without the airbags. Ive been eye balling the Bilstein 6112 and combining it with the Forged Aluminum Rough Country control arms, but im wondering if this is good enough for off roading or if theres something better. I do not want spacers. I want a good off roading experience and some nice 35's.

 

[H2OMAN]

That set up rates with the best you can get.

 

[Jeffjad]

^^^^what he said. If only looking for level that setup would be more than ideal for off-road.

 

[ANYHEMI]

Rough Country UCA's are for 3-3.5" lifted vehicles. The Bilstein 6112's will max out at 2"s of total lift.

 

[wlay00]

Rough Country UCA's are for 3-3.5" lifted vehicles. The Bilstein 6112's will max out at 2"s of total lift.

The 2 inches you get from the 6112's are on top of an already factory lift from the off-road spring. So it will be a total of 3 inches.

 

[Gandalfgrey]

Here just buy this it’s the best i had King shocks on my Jeep & it was great

 

[ANYHEMI]

The 2 inches you get from the 6112's are on top of an already factory lift from the off-road spring. So it will be a total of 3 inches.

The 1" you get from the factory is in the spring. When you add 6112's they include a new spring so you don't use your factory spring. Without the factory spring you no longer have an additional 1" lift.

 

[wlay00]

The 1" you get from the factory is in the spring. When you add 6112's they include a new spring so you don't use your factory spring. Without the factory spring you no longer have an additional 1" lift

I forgot about that. My bad, and I am guessing you can't use the ORP springs with the 6112.

 

[Bignick75]

The 1" you get from the factory is in the spring. When you add 6112's they include a new spring so you don't use your factory spring. Without the factory spring you no longer have an additional 1" lift.

No, guys have measured before and after the 6112’s and get 2” of lift on their rebel. So it its 3” taller than regular non ORP 1500’s.

 

[Bignick75]

I forgot about that. My bad, and I am guessing you can't use the ORP springs with the 6112.

Guys have measured before and after the 6112’s and get 2” of lift on their rebel. So it its 3” taller than regular non ORP 1500’s.