Bedlight Help

[jsl77]

Did the bedlight install with the jumper wire. Need help with alfaobd activation.

 

[vincentw56]

Did the bedlight install with the jumper wire. Need help with alfaobd activation.

What help you need? Could you provide more info? Plus, I don't think it needs activating?

 

[jsl77]

Light not working not sure where to go in alfa obd. Unplugged the two plugs to see if there were already wired pinned in the spots and I now have no interior light and service start/ stop and traction control lights on.

 

[jsl77]

Light not working not sure where to go in alfa obd. Unplugged the two plugs to see if there were already wired pinned in the spots and I now have no interior light and service start/ stop and traction control lights. Not sure what i did or bumped.

 

[skyhawk42]

• CBC Config I/0 Bed Light Switch Input
  Present - Pin G16: -> Yes
• CBC Config 1/0 Connector F Pin 6:
  Baggage Compartment Lamps Output
  Present -> Yes
• 2014 CBC Config 1/0 & FEAT.: Bed Lighting
  Present - Pin A5: -> Yes

 

[jsl77]

• CBC Config I/0 Bed Light Switch Input
  Present - Pin G16: -> Yes
• CBC Config 1/0 Connector F Pin 6:
  Baggage Compartment Lamps Output
  Present -> Yes
• 2014 CBC Config 1/0 & FEAT.: Bed Lighting
  Present - Pin A5: ->

• CBC Config I/0 Bed Light Switch Input
  Present - Pin G16: -> Yes
• CBC Config 1/0 Connector F Pin 6:
  Baggage Compartment Lamps Output
  Present -> Yes
• 2014 CBC Config 1/0 & FEAT.: Bed Lighting
  Present - Pin A5: -> Yes

Is there away to reset to factory and start over incase I do something wrong.

 

[vincentw56]

Is there away to reset to factory and start over incase I do something wrong.

No. You need to backup your configuration first. You can restore it if you screw something up.

 

[jsl77]

Well I didn't make any changes yet. Just look around. Not sure why I'm having the different service lights come on unless I knocked something loosi g under the dash.

 

[vincentw56]

Well I didn't make any changes yet. Just look around. Not sure why I'm having the different service lights come on unless I knocked something loosi g under the dash.

Shouldn't have any issues after installing it. You must have messed up a wire or something. You didn't explain what method you used? Did you install the dealer upgrade kit or do it a different way?

 

[jsl77]

Used the oem kit with the bypass cable. I did not run a new wire to the front. I have wires already pinned to the locations used for factory set so I figured the wiring was already there.