Is anyone running the BDS UCAs that could provide a clearance dimension for me?
Backstory I purchase new wheels(20x10 w/-19 OS)and tires (35x12.5) and the motofab 3" front 2" rear spacer kit. Haven't installed anything yet but sounds like I'm going to have an issue with stock uca angle and uca banging the coil at full droop.
So, to get ahead of that I'm looking for new UCAs. The BDS ones claim they are good for lift/level but state that if your running stock wheels and 12.5 tires they will rub at full lock turn.
So here's the math I'm coming up with stock wheel 18x 8 +19.1, new wheel 20x10 -19
Stock tire 10.8"W, new tire 12.5W.
New wheel should have about 0.5" more clearance but new tire is wider so vs stock the tire will be about 1-1/4 closer to the UCA. Not sure if this is enough clearance for the BDS UCAs
Backstory I purchase new wheels(20x10 w/-19 OS)and tires (35x12.5) and the motofab 3" front 2" rear spacer kit. Haven't installed anything yet but sounds like I'm going to have an issue with stock uca angle and uca banging the coil at full droop.
So, to get ahead of that I'm looking for new UCAs. The BDS ones claim they are good for lift/level but state that if your running stock wheels and 12.5 tires they will rub at full lock turn.
So here's the math I'm coming up with stock wheel 18x 8 +19.1, new wheel 20x10 -19
Stock tire 10.8"W, new tire 12.5W.
New wheel should have about 0.5" more clearance but new tire is wider so vs stock the tire will be about 1-1/4 closer to the UCA. Not sure if this is enough clearance for the BDS UCAs