5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Aux lighting help
- Thread starter 1BADRAMLIMITED
- Start date
What style connectors do your new lights have?
I bought this one and the splitter harness to connect two 2-pin duestch style light pods.
Reverse Light Wiring Harness | 7 Pin to Deutsch In-line Tee Harness | Universal
Add reverse lights quickly and easily without cutting and compromising your OEM wiring. Our in-line tee harness plugs in to the 7-pin connector behind your bumper. So no ugly wires hanging out the back of your truck. Everything works and looks just like stock. Comes with a single Deutsch DT...
www.vicedesign.ca
Splitter harness
www.vicedesign.ca
DT Harness Splitter 2-1
This LED Light Harness Splitter features 1 Deutsch DT 2-Pin Connector to 2 Deutsch DT 2-Pin Connectors. This splitter enables you to wire up 2 LED lights of 72W or less per light.
www.vicedesign.ca
1BADRAMLIMITED
Spends too much time on here
My lights just have a red and black lead on them. I’m pretty good at soldering so I bought some 2 pin deutsch connectors a while back and have a spool of wire.
Jako
Spends too much time on here
Not sure which one you want.
Bed Light Compilation
I was searching for a pdf for the bed light kit installation and came across these 3. BUT I can not find the installation instruction pdf. Anyone with more info please feel free to post. https://5thgenrams.com/community/threads/mopar-bed-light-kit-tips.2890/page-4...
5thgenrams.com
Richard320
Spends too much time on here
- Joined
- Aug 3, 2019
- Messages
- 2,214
- Reaction score
- 2,368
- Points
- 113
Sorry to tell you but that's not the right Curt harness. You want the one that has a 7 pin on the end, not a 4 pin. 4 pin only has tail, right turn. left turn, and ground. 7 pin adds reverse lights, brake control, and 12V charging.
This thread is probably the one you wanted
Added some reverse lights today
Added MICTUNING Flush Mount Led 20W Flood Cree led lights for reverse lights today using the Curt 56584 and a 5 pin flat trailer side plug. No cutting into any factory wiring.
5thgenrams.com
Littlejoe81
Active Member
Maybe looking for this....
Tailgate light with 4pin with reverse light
New here, sorry if this is posted somewhere else but I couldn’t find it. I bought a tailgate light bar. I can’t find on hear or a reliable source using google; a wiring diagram for the tail light connector. I’m trying to find the power wire for the reverse lights so the light bar will power on...
5thgenrams.com
Attachments
1BADRAMLIMITED
Spends too much time on here
This is it thanks!Sorry to tell you but that's not the right Curt harness. You want the one that has a 7 pin on the end, not a 4 pin. 4 pin only has tail, right turn. left turn, and ground. 7 pin adds reverse lights, brake control, and 12V charging.
This thread is probably the one you wanted
Added some reverse lights today
Added MICTUNING Flush Mount Led 20W Flood Cree led lights for reverse lights today using the Curt 56584 and a 5 pin flat trailer side plug. No cutting into any factory wiring.
1BADRAMLIMITED
Spends too much time on here
Thank uMaybe looking for this....
Tailgate light with 4pin with reverse light
New here, sorry if this is posted somewhere else but I couldn’t find it. I bought a tailgate light bar. I can’t find on hear or a reliable source using google; a wiring diagram for the tail light connector. I’m trying to find the power wire for the reverse lights so the light bar will power on...
1BADRAMLIMITED
Spends too much time on here
Correct me if I’m misunderstanding the install. From what I gather is I tie the curt adapter into the oem harness then use a flat 5pin connector and wire a ground and reverse power source to my lights??Sorry to tell you but that's not the right Curt harness. You want the one that has a 7 pin on the end, not a 4 pin. 4 pin only has tail, right turn. left turn, and ground. 7 pin adds reverse lights, brake control, and 12V charging.
This thread is probably the one you wanted
Added some reverse lights today
Added MICTUNING Flush Mount Led 20W Flood Cree led lights for reverse lights today using the Curt 56584 and a 5 pin flat trailer side plug. No cutting into any factory wiring.
1BADRAMLIMITED
Spends too much time on here
So I need to tap into the black/ reverse and white/ground correct?Maybe looking for this....
Tailgate light with 4pin with reverse light
New here, sorry if this is posted somewhere else but I couldn’t find it. I bought a tailgate light bar. I can’t find on hear or a reliable source using google; a wiring diagram for the tail light connector. I’m trying to find the power wire for the reverse lights so the light bar will power on...
Richard320
Spends too much time on here
- Joined
- Aug 3, 2019
- Messages
- 2,214
- Reaction score
- 2,368
- Points
- 113
A 4 pin has no reverse light feed. Period. A 5 pin or a 7 pin will
The way it works is to plug a harness into the backside of the 7 pin connection. Then you can cut the wires you don't want or tie them out of the way or whatever and use the black and white wires to power your auxiliary backups. White is ground, black is power.
Sorry to tell you but that's not the right Curt harness. You want the one that has a 7 pin on the end, not a 4 pin. 4 pin only has tail, right turn. left turn, and ground. 7 pin adds reverse lights, brake control, and 12V charging.
This thread is probably the one you wanted
Added some reverse lights today
Added MICTUNING Flush Mount Led 20W Flood Cree led lights for reverse lights today using the Curt 56584 and a 5 pin flat trailer side plug. No cutting into any factory wiring.
Or buy the one from Vice Design I linked aboveSorry to tell you but that's not the right Curt harness. You want the one that has a 7 pin on the end, not a 4 pin. 4 pin only has tail, right turn. left turn, and ground. 7 pin adds reverse lights, brake control, and 12V charging.
This thread is probably the one you wanted
Added some reverse lights today
Added MICTUNING Flush Mount Led 20W Flood Cree led lights for reverse lights today using the Curt 56584 and a 5 pin flat trailer side plug. No cutting into any factory wiring.
1BADRAMLIMITED
Spends too much time on here
Right I’m clear on that I am returning the harness I got and getting the correct 56584
LaxDfns15
Ram Guru
You can still use that harness and just splice into the 7 pin wires instead of trying to pull off the 4 pin. The whole point of using that harness is so you don't cut up any OEM wires, so if your wiring doesn't work you can take it back to stock without any modifications.
But yeah, if you're trying to attach a plug to the 4 pin connector you'll need to return that harness for a 5 or 7 pin to get the right power source.
But yeah, if you're trying to attach a plug to the 4 pin connector you'll need to return that harness for a 5 or 7 pin to get the right power source.
1BADRAMLIMITED
Spends too much time on here
Yea I appreciate u adding those to choose from but I have all the necessary items to make my own at half the price thank you though bud.
1BADRAMLIMITED
Spends too much time on here
I found the correct Curt harness for 30 bucks and returned the other one to Amazon. No biggie and I appreciate the input
Users who are viewing this thread
Site Vendors
