5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

ARB Twin Compressor Mounting Solution

rebel70

Member
Joined
Feb 6, 2021
Messages
23
Reaction score
38
Just upgraded to an ARB Twin Compressor! I have my air outlets mounted remotely so I wanted a spot that was safe and out of the way. Below is my solution. I made my own “remote intake” setup and relocated the air filters outside the enclosure since I figured the compressor would run hot and there wouldn’t be much air in the closed box. I’ll let you know how it works out, but this way it will suck cool, fresh air! (Excuse the drying sealant and air hose that hasn’t been routed to my tank yet!).
 

Attachments

  • 5CAA23C6-1D13-4067-B6D8-47C3FA439B59.jpeg
    5CAA23C6-1D13-4067-B6D8-47C3FA439B59.jpeg
    258.2 KB · Views: 151
  • 619F96E5-CFC8-459D-9A26-B3E576DE841C.jpeg
    619F96E5-CFC8-459D-9A26-B3E576DE841C.jpeg
    122.4 KB · Views: 150

kbraunphoto

Member
Joined
Sep 23, 2020
Messages
21
Reaction score
8
I've got the ARB single, and looking for a creative way to have it in my TBD bed platform/storage; but damn the amount of wiring and little pieces....
 

Motoscout

Member
Joined
Apr 19, 2022
Messages
9
Reaction score
22
Location
Tacoma, WA.
Just upgraded to an ARB Twin Compressor! I have my air outlets mounted remotely so I wanted a spot that was safe and out of the way. Below is my solution. I made my own “remote intake” setup and relocated the air filters outside the enclosure since I figured the compressor would run hot and there wouldn’t be much air in the closed box. I’ll let you know how it works out, but this way it will suck cool, fresh air! (Excuse the drying sealant and air hose that hasn’t been routed to my tank yet!).
This is a clever place to put that beast of a compressor! Following to see how it works out!
 

JDHarris

Active Member
Joined
Sep 18, 2020
Messages
40
Reaction score
26
Location
South Orange County
I got the RamAir intake which freed up all the space where the air box was. Used the stock air box mount as a template to have a custom bracket made up to hold the compressor where the air box was.
 

Users who are viewing this thread

Top