Any service manual owners willing to help a brother out?

[jbod77]

Looking to see if someone will show me what these pages say about DASM. Specifically regarding installation procedures of the unit. 2019 1500 limited, 5.7 e-torque

"DASM information is found under Electrical in the Electronic Control Modules category of the service manual. Here you will find removal and installation procedures, as well as a calibration procedure."

 

[Rick3478]

I tried to buy a service manual, was even willing to spend a couple hundred for a USB, but they pretty much blew me off. They expect everyone to sign up for their online subscription plan. Not going to repeat in polite company what I said about that...

 

[Cbty2050]

This what you are looking for?

 

[jbod77]

This what you are looking for?

thank you SO much
i believe so. looking to confirm the angles are correct on my unit as i'm have issues with the features controlled by the DASM. is that all it says about angle? "prefered andgle of -1.0 =/-.01?

 

[Cbty2050]

thank you SO much
i believe so. looking to confirm the angles are correct on my unit as i'm have issues with the features controlled by the DASM. is that all it says about angle? "prefered andgle of -1.0 =/-.01?

That's it.

 

[jbod77]

That's it.

can't thank you enough. hope this is the issue with my DASM and it fixes my problems.

 

[jbod77]

stupid follow up question but my inclinometer doesn't measure "negative" would the -1 in the spec be down or up? i'm guessing down but wanted to see if anyone can confirm. bit of a brain fog this morning

 

[Jimmy07]

stupid follow up question but my inclinometer doesn't measure "negative" would the -1 in the spec be down or up? i'm guessing down but wanted to see if anyone can confirm. bit of a brain fog this morning

Negative would be a downward angle for the DASM camera.