5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Alignment specs?

SgtSlaughter

Active Member
Joined
Mar 9, 2025
Messages
25
Reaction score
7
Points
3
Age
30
Can't find my alignment sheet to post a pic but I know im running 5.2* caster.

Running superlift upper control arms, fox 2.5's, 285x75r18 on Icon 18x9 5" backspacing -1mm offset.

I just rotated my tires and now they're rubbing again. Ive already trimmer the hell out of my inner fender liners and the tab that protrudes from the pinch weld.

Does anyone have any alternative alignment specs or recommendations for an additional 1inch lifted non-air ride rebel?
 
Caster shows 4-5.3 on my sheet and mine is currently running at 4.1. I have no rubbing on 275/70-18, but you're running a 1.5" taller tire, so that would eat up some of the space I still have remaining.
 
i didnt rub at all when i was running low 4s caster. Now I’m “corrected” at the higher end and it rubs slightly on reverse/full lock.

If you can live with it, lower caster.
 
i didnt rub at all when i was running low 4s caster. Now I’m “corrected” at the higher end and it rubs slightly on reverse/full lock.

If you can live with it, lower caster.
Shop was about to get me down to 4.7 and 4.3 and it fixed a lot of the rubbing I had.

Previously I was rubbing at 5.3 caster.

Thanks for the info
 
Here's a stock limited with air ride for reference.
PXL_20250524_175659796~2.jpg
 
Keep in mind, air ride calls for different toe specs. Total on non-air is .10. But caster and camber should be pretty much the same.
 

Users who are viewing this thread

Back
Top