Aftermarket setups for running boards

[Mcwilson77]

Just curious what people have used. Whats the quality. And pics

 

[JeremyFOwens]

I went with the Tyger side steps on amazon. They seem pretty sturdy and easy install.

Amazon.com: Tyger Auto TG-RS9D50208 Riser Compatible with 2019-2020 Dodge Ram 1500 Crew Cab 5.7' Short Bed (Not for 19-20 Classic) 5inch Wheel-to-Wheel W2W Black Side Step Rails Nerf Bars Running Boards: Automotive

Buy Tyger Auto TG-RS9D50208 Riser Compatible with 2019-2020 Dodge Ram 1500 Crew Cab 5.7' Short Bed (Not for 19-20 Classic) 5inch Wheel-to-Wheel W2W Black Side Step Rails Nerf Bars Running Boards: Running Boards - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

smile.amazon.com

 

[Rhombus]

Just curious what people have used. Whats the quality. And pics

Ionic 51 series bright from Running Board Warehouse. Great price and I really like these boards. Only had them a little over two months so I can’t speak to longevity.

2020 Ram Truck 1500 Ionic 51 Series Brite Running Boards | RealTruck

RealTruck ships the 2020 Ram Truck 1500 Ionic 51 Series Brite Running Boards fast and free within the lower 48 United States. Take advantage of our product experts, image galleries, and legendary customer service to get the right part with no hassle.

runningboardwarehouse.com

 

[Bink]

I went with Go Rhino 1000 series 5”. Incredibly easy to install and work like they should.

 

[Rhombus]

The main thing is, whatever you buy. The mounting screws are painted under the truck. Get a tap & die set and chase the screws before you install. Getting the paint out of the threads makes installation MUCH easier.

 

[LaxDfns15]

Let's see those running boards/side steps

Please post pictures with specs. Thanks

5thgenrams.com

Rebels with Nerfbars/sidesteps

Id like to see what side steps people are using and what you recommend. Pics are a plus... looking to see what side steps look best. And... excuse to show off your truck lol. Thanks!

5thgenrams.com

 

[Bink]

The main thing is, whatever you buy. The mounting screws are painted under the truck. Get a tap & die set and chase the screws before you install. Getting the paint out of the threads makes installation MUCH easier.

I was really concerned about the paint and wasn’t going to go out to buy anything, so here’s what I did (and a lot of you will think I wasn’t smart for doing it this way...but it worked). The top bolt on all of mine were fine, nuts went on no problem. I sprayed the bottom bolts with just a small amount of WD40 and slowly tightened the nuts. Worked perfectly for me. Every now and then if it felt like it was getting a little too tight I’d back off and then proceed. Hope this is helpful.

 

[Mcwilson77]

Ionic 51 series bright from Running Board Warehouse. Great price and I really like these boards. Only had them a little over two months so I can’t speak to longevity.

2020 Ram Truck 1500 Ionic 51 Series Brite Running Boards | RealTruck

RealTruck ships the 2020 Ram Truck 1500 Ionic 51 Series Brite Running Boards fast and free within the lower 48 United States. Take advantage of our product experts, image galleries, and legendary customer service to get the right part with no hassle.

runningboardwarehouse.com

Any pics? I was looking at these the other day

 

[SilverNight2020]

I went with iBoard 5" from Realtruck after not liking the 3" tubes I had on.

 

[PorBoy]

Having a wife who’s only 5’0” I had to go powered and went with Amp Research.

 

[Mcwilson77]

Having a wife who’s only 5’0” I had to go powered and went with Amp Research.

Having a wife who’s only 5’0” I had to go powered and went with Amp Research.

I wish i could have. I just bought the Borla cat back. Wife would have killed me if i bougbt the powered ones as well

 

[Mcwilson77]

I went with iBoard 5" from Realtruck after not liking the 3" tubes I had on. View attachment 53519 View attachment 53520 View attachment 53521

Looks much better

 

[Le_Slacker]

Westin wheel to wheel. The 4th bracket on each side was a bit of a pain!


2020 1500 Canadian Sport 4x4 Delmonico Red

 

[PorBoy]

Shoot, my wife kills me on a daily based upon what I buy. Then she brings me back to life so that she can kill me all over again.

 

[Rhombus]

Any pics? I was looking at these the other day

 

[mikeru82]

I went with Westin HDX Black drop steps. I really like how they look but they developed a little bit of surface rust in a few spots over the winter. Haven't had a chance to see if that will clean up.

 

[dano257]

 

[Mcwilson77]

I ended up going with the ionic 41 series. Love them

 

[ruderam2000]

I went with this style. A few manufacturers sell this model, this one by Raptor. They just slap their name on the plastic mold. They are decent. I did not want a gloss finish so I looked for a satin/matte finish. This is more of a semi-gloss I would guess. I wanted something easy for the family to get in and out off without too many sharp edges or a small step for them to slip off of. I don't really use it since I can hop on and off with ease.

 

[kiapghff]

I went Raptor 6" brushed aluminum. Haven't put them on yet.