Adjusting windshield washer spray pattern

[gpbst3]

The lower left corner of my windshield never gets enough washer fluid spray. It does not matter how long I hold the spray button. Is there a way to adjust the spray pattern?

 

[Levi Morgan]

Bad nozzles. I have had two replacements. 185$ ra

 

[eTorqueCoasting]

Bad nozzles. I have had two replacements. 185$ ra

Yikes! Seems pricey!

 

[Buz]

I have the exact same issue, just haven't gotten around to fixing it yet.
Take a pin and stick it in the nozzle opening and gently adjust it a tad down and to the left.
I've had luck doing this with many vehicles over the years.

 

[Richard320]

I have the exact same issue, just haven't gotten around to fixing it yet.
Take a pin and stick it in the nozzle opening and gently adjust it a tad down and to the left.
I've had luck doing this with many vehicles over the years.

I used to use a straightened staple to clean out the clogs.

 

[Montana_]

Reviving this oldie because mine on a new to me '22 are aimed pretty awful as well. They don't even hit until middle window.

Replacements can be bought here for around $15 each for the ones on the underside of my hood, but I'm going to jab a knife in there in the bottom left corners and hope it opens it up just enough to spritz the bottom sections of the windshield. Worked in the past, but I miss the ones you can just turn and aim manually and a lot of truck use this under hood setup now to which I've never seen those sorts of nozzles for.