5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

33x12.5R20 2022 Limited- Looking for help

Dupras

Active Member
Joined
Aug 9, 2021
Messages
75
Reaction score
57
Have a 2022 Limited (without air suspension) and it’s time to swap out the OEM tires. Looking at moving from my 285/45/R22 and getting into 20s for ride comfort and a more meaty AT tire. Would love to hear feedback on getting a set of 33x12.5R20s using 20x9 wheels with a +1 offset without leveling or trimming.

Anyone have this setup and can confirm no rubbing or issues with the UCAs?
 

1BADRAMLIMITED

Ram Guru
Joined
Nov 28, 2022
Messages
1,348
Reaction score
1,180
Location
Oklahoma
Have a 2022 Limited (without air suspension) and it’s time to swap out the OEM tires. Looking at moving from my 285/45/R22 and getting into 20s for ride comfort and a more meaty AT tire. Would love to hear feedback on getting a set of 33x12.5R20s using 20x9 wheels with a +1 offset without leveling or trimming.

Anyone have this setup and can confirm no rubbing or issues with the UCAs?
i have 20x9 0 offset wheels but 35x12.5r20 in terms of space between uca and tire the 0 or 1+ offset is fine . if your wheels were a 20x9 +18 then yea u would have a problem.
 

Dupras

Active Member
Joined
Aug 9, 2021
Messages
75
Reaction score
57
i have 20x9 0 offset wheels but 35x12.5r20 in terms of space between uca and tire the 0 or 1+ offset is fine . if your wheels were a 20x9 +18 then yea u would have a problem.
Damn, so you managed to get 35s on there with a 0 offset on stock specs with no rub or trimming?
 

Dupras

Active Member
Joined
Aug 9, 2021
Messages
75
Reaction score
57
i put 35's after i leveled the truck. but prior to the level i had the stock limited wheels 20x9 +18 33x11.5r20 and a they fit just fine.
So if you had the 33x11.5R20 with the stock offset, I should be good with the +1 offset wheel I’m looking at with going 33x12.5. Thanks so much for the help!
 

1BADRAMLIMITED

Ram Guru
Joined
Nov 28, 2022
Messages
1,348
Reaction score
1,180
Location
Oklahoma
So if you had the 33x11.5R20 with the stock offset, I should be good with the +1 offset wheel I’m looking at with going 33x12.5. Thanks so much for the help!

here are a few examples to help you decide but i would say yes you should be fine with uca and tire clearance on a 0mm or +1 offset

i went through customoffsets gallery and played around on the site for a while until i could confirm my current tire/wheel setup would work this may help u as well

 
Last edited:

theblet

Legendary member
Joined
Feb 8, 2021
Messages
5,517
Reaction score
5,316
I thought so. Looks like I can get away with the 33s but for 35s at least a level. Any experience with towing with being leveled?
Just a couple of time, but nothing real heavy (no camper, enclosed trailers). It was fine.
 

CHeYeNNe71

Ram Guru
Joined
Aug 11, 2023
Messages
1,203
Reaction score
1,003
Location
Sh*tcagoland, IL
just for reference you can fit both of these stock height. Might need a heat gun for front wheel well liners

1720183895229.png

1720183989598.png




 

Users who are viewing this thread

Top