3.5" readylift done

[stippLe]

Trying to find suitable rim to fit. Cause on full steer it rubs tiny bit with stock rims. To he expected with 35x12.5r20 Ridge grapplers

 

[ksn240]

Trying to find suitable rim to fit. Cause on full steer it rubs tiny bit with stock rims. To he expected with 35x12.5r20 Ridge grapplers

View attachment 22855

Should just be at full lock on the UCA. If you want to stay with stock wheels just add about a 1/4” spacer and you should be ok.

 

[stippLe]

Should just be at full lock on the UCA. If you want to stay with stock wheels just add about a 1/4” spacer and you should be ok.

yeah I bought them already for temporary solution we're going to put them on in a few hours

 

[ksn240]

yeah I bought them already for temporary solution we're going to put them on in a few hours

As far as new wheels, anything 0 or with a negative offset will rub. There is a small metal tab that protrudes underneath the factory splash guard. You can trim that off and then usually be in good shape.

 

[Mdegen93]

Trying to find suitable rim to fit. Cause on full steer it rubs tiny bit with stock rims. To he expected with 35x12.5r20 Ridge grapplers

View attachment 22855

Do the fender mod

 

[stippLe]

Do the fender mod

Don't know what that is.....

 

[Mdegen93]

Don't know what that is.....

How to: modify wheel wells for larger tires/Negative offsets

Snapped some pictures while modifying the wheel wells today to fit my 35x12.50x20 on a 20x10 -18 offset. Lift kit is a ReadyLift 3.5 SST A lot of people ask do they Rub? Answer is Yes, solution is easy since it’s minimal labor. Tools needed: Wet towel 8mm socket Grinder Spray paint Heatgun...

5thgenrams.com

Had to do it to mine to run a -12

 

[Rampat]

Trying to find suitable rim to fit. Cause on full steer it rubs tiny bit with stock rims. To he expected with 35x12.5r20 Ridge grapplers

View attachment 22855

Post some more pictures! She looks amazing. I love seeing these lifted on stockers.

 

[RAMSport2019_392]

Trying to find suitable rim to fit. Cause on full steer it rubs tiny bit with stock rims. To he expected with 35x12.5r20 Ridge grapplers

View attachment 22855

This truck looks perfect in my opinion.

 

[RichM1983]

I love those stock Laramie Sport wheels with the 35" tires. I can't imagine you'd find a better wheel in my opinion.

 

[bigdaddymac]

Looks great! Mine goes in Wednesday for 3.5” lift and Ridge Grappler 35x12.50r20 on Fuel Sledge wheels w a 0 offset.

 

[Rampat]

How high does this kit raise the front and the back? Is it 3.5 front and 1.5 rear?

 

[Boomer]

DO NOT USE SMALL WHEEL SPACERS!!! They are not hub centric. You do not want all the trucks weight on the lugs. It is very dangerous. Research it.

 

[Boomer]

The safe thing to do is buy the a rim with the correct offset.