2024 Ram Remote start programming

[Sureshot]

Okay I have a 2024 Ram tradesman I’m wanting to activate my remote start !
I have downloaded the Alfa OBD app
I purchased the OBDlinkMX+obdll
I have purchased a remote start key that was recommended
I have a factory hood ajar sensor that came with truck already

I am curious what else am I needing to program my truck to turn on factory Remote start. And do I need the security bypass cables to make this happen. Can anyone send me step by step instructions,On how to do this? I’ve seen a lot of people tagging @Jimmy07 and was wondering if he is who could help me thanks.

 

[firemedic10584]

I did a whole write-up on this with step by step instructions. Do a search for posts by me.

 

[Sureshot]

I did a whole write-up on this with step by step instructions. Do a search for posts by me.

Okay so I went through the steps. But no luck. Any help on what to do?

 

[Jimmy07]

That’s the behavior when the gateway is not bypassed. Do you have a bypass installed when making that change?

 

[BlueHemi1500]

Okay I have a 2024 Ram tradesman I’m wanting to activate my remote start !
I have downloaded the Alfa OBD app
I purchased the OBDlinkMX+obdll
I have purchased a remote start key that was recommended
I have a factory hood ajar sensor that came with truck already

I am curious what else am I needing to program my truck to turn on factory Remote start. And do I need the security bypass cables to make this happen. Can anyone send me step by step instructions,On how to do this? I’ve seen a lot of people tagging @Jimmy07 and was wondering if he is who could help me thanks.

As noted above you will need a security gateway bypass cable and it will need to be installed. Once installed, you will connect your MX+ to the OBD II port on the end of the security bypass cable.
The security gateway is preventing you from writing/making changes to the various modules you are trying to program/modify.

BlueHemi1500

 

[Sureshot]

That’s the behavior when the gateway is not bypassed. Do you have a bypass installed when making that change?

Okay so I need a bypass cable? Could you Send a link to one you suggest or recommend! Thanks

 

[Sureshot]

As noted above you will need a security gateway bypass cable and it will need to be installed. Once installed, you will connect your MX+ to the OBD II port on the end of the security bypass cable.
The security gateway is preventing you from writing/making changes to the various modules you are trying to program/modify.

BlueHemi1500

I did not have the any security cables I will order some try this again next , thanks

 

[Jimmy07]

Okay so I need a bypass cable? Could you Send a link to one you suggest or recommend! Thanks

Amazon.com

 

[BlueHemi1500]

Amazon.com

BlueHemi1500