Just picked a 2023 ram limited 1500 with the multi function tailgate and cargo management system. Finding bed cover choices to be limited. Wondering if anybody has run into a similar problem and has a solution. Prefer a semi rigid bed cover similar to a backflip MX 4. Any help would be greatly appreciated.
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
2023 Ram Limited bed covers
- Thread starter LewEP
- Start date
Jarrod32
Active Member
- Joined
- Aug 6, 2023
- Messages
- 37
- Reaction score
- 96
- Points
- 18
- Age
- 58
I have a Limited with Rambox and MFT as well. I went with a basic rollcover (the Mopar brand) as I don't care for the rigid/hard covers. Probably not want you wanted, but I also found the options to be a bit limited.
O'Town Ram
I know less and less about more and more
Why not the MX 4? They make it for that truck.
I believe the corner brackets against the cab prevent you from being able to install the rails.
RHCan
USAF Retired Vet
Bakflip makes a version of the MX 4 design just for the mft version. I had on my 2020. Fit and worked great.
O'Town Ram
I know less and less about more and more
Both the MX4 and the undercover flex have models that accommodate the corner brackets of MFT.
But, if you have the Ram boxes you will not have those corner braces
Last edited:
RHCan
USAF Retired Vet
The only difference is they cut the rails to fit and add a different hold down up front to make it work with the mft brackets.
Last edited:
RHCan
USAF Retired Vet
Realtruck
Well-Known Member
- Joined
- Jul 2, 2021
- Messages
- 245
- Reaction score
- 132
- Points
- 43
- Age
- 34
The MX4 is designed to fit your specific bed. There would be an installation kit included to accommodate for the brackets found with the multifunction tailgate bed. If you have any questions on fitment, availability, ship times, or would like a pricing quote, please PM me or email me at [email protected]
themust
Active Member
- Joined
- Feb 17, 2020
- Messages
- 76
- Reaction score
- 84
- Points
- 18
- Age
- 60
RigjtOn Brackets makes a simple 90 degree steel bracket that replaces and is actually stronger than the one that is required for the MFT. Use that and you can then have a much broader range of cover options. I installed these very easily and replaced the standard soft cover with my old hard cover that had been on my older ‘19 Laramie with the standard (non mft) tailgate. It also therefore doesn’t have the intrusion of the reinforcing brackets that come with the mft for bed rigidity.
