5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2022 b&w turnover hitch

lgb

Member
Joined
Nov 13, 2021
Messages
14
Reaction score
2
i have a 2022 laramie 1500 6.4 beds 4 corner air i am trying to install a b&w turn over kit 1319
says it fits a 2019 to 2021 has anyone installed this on a 2022 i did not think 2022 would be different
than a 2021., any help would appreciated.
 

Trooper4

Ram Guru
Joined
Feb 14, 2019
Messages
1,578
Reaction score
1,671
Location
Ellensburg, Washington
i have a 2022 laramie 1500 6.4 beds 4 corner air i am trying to install a b&w turn over kit 1319
says it fits a 2019 to 2021 has anyone installed this on a 2022 i did not think 2022 would be different
than a 2021., any help would appreciated.
Don't know why it wouldn't fit, but just make sure to get the air lines back in place and well away from the exhaust. Installer didn't, and it cost them 5K to fix it after it melted the lines.
 

Nsleone

Ram Guru
Joined
Sep 20, 2020
Messages
711
Reaction score
619
Location
Florida
i have a 2022 laramie 1500 6.4 beds 4 corner air i am trying to install a b&w turn over kit 1319
says it fits a 2019 to 2021 has anyone installed this on a 2022 i did not think 2022 would be different
than a 2021., any help would appreciated.
That’s the gooseneck right?
 

lgb

Member
Joined
Nov 13, 2021
Messages
14
Reaction score
2
just got it finished, and it does fit, took a little time but it fit really nice, and yes the air lines and wire harness end up kinda close to exhaust
pipe so i will have to wrap them with some exhaust tape, the way it is set up you really cannot reroute them with out cutting them
and that is not an option
 

Nsleone

Ram Guru
Joined
Sep 20, 2020
Messages
711
Reaction score
619
Location
Florida
just got it finished, and it does fit, took a little time but it fit really nice, and yes the air lines and wire harness end up kinda close to exhaust
pipe so i will have to wrap them with some exhaust tape, the way it is set up you really cannot reroute them with out cutting them
and that is not an option
Can you post some pictures? I’ve been looking into doing this myself
 

lgb

Member
Joined
Nov 13, 2021
Messages
14
Reaction score
2
pic of 2022 laramie with b&w 1319 turn over hitch installed. go to e-trailer there is a video of an install on a 2019
really helpful. left side wire & air lines are going to be problem keeping away from exhaust its about 2 inches away
i might try removing the passenger side bracket and try to go up on top of the air shock tower, if not than its going
to be asbestos or some kind of heat resistant insulation
 

Attachments

  • DSCF1023.JPG
    DSCF1023.JPG
    142.4 KB · Views: 24
  • DSCF1021.JPG
    DSCF1021.JPG
    116.8 KB · Views: 24
  • DSCF1016.JPG
    DSCF1016.JPG
    101.6 KB · Views: 22
  • DSCF1014.JPG
    DSCF1014.JPG
    75 KB · Views: 20
  • DSCF1018.JPG
    DSCF1018.JPG
    92.2 KB · Views: 20
  • DSCF1020.JPG
    DSCF1020.JPG
    75.3 KB · Views: 23

Nsleone

Ram Guru
Joined
Sep 20, 2020
Messages
711
Reaction score
619
Location
Florida
pic of 2022 laramie with b&w 1319 turn over hitch installed. go to e-trailer there is a video of an install on a 2019
really helpful. left side wire & air lines are going to be problem keeping away from exhaust its about 2 inches away
i might try removing the passenger side bracket and try to go up on top of the air shock tower, if not than its going
to be asbestos or some kind of heat resistant insulation
Awesome! What do you plan on towing with it?
 

lgb

Member
Joined
Nov 13, 2021
Messages
14
Reaction score
2
23ft nash fifth wheel 7000lbs, using the anderson utimate hitch system to keep my weight down plus easy to handle 35lbs
 

Users who are viewing this thread

Top