Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Rolling perfection IMHO. 
I went with cross drilled only from r1 concepts. From what I have gathered cross drilled allows the rotors to cool down faster, slotted rotors actually increase wear on the pads a little bit, for better bike for track use. I highly doubly this ram will ever see a millisecond of track time
. Slotted and drilled do both and looks a little too busy imo. I just wanted something more to look at since the wheels grab your attention I didn’t want just stock rotors on there.Thank you, if I had to do again again I would lol. I know I’m not helping hahahahah. I know it’s not much most of the pictures where taken in or1 setting on the air suspension. But a simple 4inch lift and tires just changes the feel, look and driving presence on these things. It seems like the physical structure/body of the truck grew into a bigger truck lol. Is say go for it you won’t regret it. It still drives amazing the air suspension on these things do an amazing jobI swore I wasn't going to lift this truck... and those pics aren't helping.
To be fair I did cheat a little on the pictures lol. These pics where taken at OR1 Setting. Normal and Aero mode is a little bit shorter
Thanks! The wheels ran me a little over 9k for the set. Tires weren’t to bad at 1800 for all 4
The wheels were $9k?!? Hooollyyy crap!
Can you share a part number(s) for them, according to the site, nothing is available?I went with cross drilled only from r1 concepts. From what I have gathered cross drilled allows the rotors to cool down faster, slotted rotors actually increase wear on the pads a little bit, for better bike for track use. I highly doubly this ram will ever see a millisecond of track time
Thank you, I think so as well and it’s a major plus on the extra bed space since I bought this truck to haul my bikes to track days
Thanks man, yea the 6’4 bed for me was a must. There was no limited with the 6’4 box NorCal so I drove 6/7 hours away to SoCal to pick one up.
I actually have the wrong part number as well. The first time I ordered the rotors and waited a month they did not fit! They could have sent me the previous gen ram rotors but I did have to send my orignal set back and wait another 4-6 weeks to receive these. Your best bet is to actually call them and have someone go through their inventory and check. Make sure you tell them you have the 6 lug new body style cause it’s a pita to send sht back and wait again
Yea I wanted to be a little different and it usually cost to be a little different
Brixton Forge did all the work for me. They just asked what lift I'm going with, what tires I wanted to run and how much tire poke I wanted. I told them all the info with zero to 1/2 and inch poke would be the most I would want. They did a 20X10.5 I believe the offset is -8. Zero trimming or rub even on entry exit mode but its pretty damn close
