Derek Dredger
Active Member
Hi'yall.
Just finished the below installation on my (granite crystal metallic) truck. Looks fantastic if anybody else is considering a similar setup;
Wheels:
Method 305 Bronze
18x9
PCD- 6x139.7
Offset -12
Tires:
Cooper AT3 XLT - 295 /70 / R18
Lift:
Achieved using Bilstein 6112 shocks and coils up front (ring 7) and 5160 in the rear. No wheel spacers and no strut spacers.
Mild 1-3/4" front. 1/2 Rear.
No rub at all. Clearance is approx 1cm in the front at full lock. Tires sit pretty much flush with the fender...probably stick out 3/4 inch.
Just finished the below installation on my (granite crystal metallic) truck. Looks fantastic if anybody else is considering a similar setup;
Wheels:
Method 305 Bronze
18x9
PCD- 6x139.7
Offset -12
Tires:
Cooper AT3 XLT - 295 /70 / R18
Lift:
Achieved using Bilstein 6112 shocks and coils up front (ring 7) and 5160 in the rear. No wheel spacers and no strut spacers.
Mild 1-3/4" front. 1/2 Rear.
No rub at all. Clearance is approx 1cm in the front at full lock. Tires sit pretty much flush with the fender...probably stick out 3/4 inch.
Attachments
-
20210204_163110.jpg150.6 KB · Views: 372
-
20210204_163059.jpg58.3 KB · Views: 363
-
20210204_163038.jpg102.6 KB · Views: 373
-
20210204_163028.jpg94.6 KB · Views: 408
-
20210204_162950.jpg112.2 KB · Views: 425
-
20210204_153205.jpg105.8 KB · Views: 414
-
20210204_163007.jpg112.4 KB · Views: 373
-
20210206_131717.jpg90.4 KB · Views: 273
-
20210206_124159.jpg78.9 KB · Views: 272
-
20210206_110500.jpg113.6 KB · Views: 269
Last edited: