2019 backup cam lines dont bend

[JTMachineDesign]

Hi Folks.. first post here.. Just upgraded from my 2000 Dakota to a 2019 1500 Crew Cab so you can imagine I'm in visualization over load. Dang, this truck has lots of goodies.
I noticed the backup cam lines are not "bending" when I turn the steering wheel - no matter what I do, the lines stay straight.. Picture is great, even at night..
The guidelines are supposed to reflect the steering wheel movement is it not?

thanks for your replys in advance!

 

[iamtheav8r]

Hi Folks.. first post here.. Just upgraded from my 2000 Dakota to a 2019 1500 Crew Cab so you can imagine I'm in visualization over load. Dang, this truck has lots of goodies.
I noticed the backup cam lines are not "bending" when I turn the steering wheel - no matter what I do, the lines stay straight.. Picture is great, even at night..
The guidelines are supposed to reflect the steering wheel movement is it not?

thanks for your replys in advance!

There are 3 or 4 different views for that camera one only has the bendy lines. Try another view until you find the correct one.

 

[JTMachineDesign]

Thanks av8r! i'll check it out as soon as the temp gets above 30

btw, noticing your user name.. I have a 1959 Bellanca Crusiemaster, A&P/IA,DER

 

[Patsy1099]

Welcome and congrats.


Make sure you go file for this additional rebate. Do it within 60 days of purchase.

The only qualification is that “someone in your household” must have a non-FCA vehicle or that you traded in a non-FCA vehicle.

https://5thgenrams.com/community/threads/update-250-rebate-on-all-new-rams.5648/

Direct link to form (you DO NOT have to have Allstate insurance):

https://www.allstate.bonusdrive.com/Content/Bonus_Drive_Form_With_Survey_Allstate.pdf

 

[iamtheav8r]

Thanks av8r! i'll check it out as soon as the temp gets above 30

btw, noticing your user name.. I have a 1959 Bellanca Crusiemaster, A&P/IA,DER

Beautiful aircraft! Enjoy.

 

[JTMachineDesign]

thanks!

So I dove into the menus... turns out the bendy vs rigid lines option is just a checkbox.. found it and now my lines are bendy

Also found the reason I was occasionally hearing beeping sounds while on the freeway... there's an option to beep when the blind spot light comes on, or not to beep... That was really bugging me
AND!
Got to try hooking up the trailer with the backup cam.. nailed it first time. finally, I don't have to follow my wife's wacky hand signals anymore but apparently the rear proximity sensors think my trailer is an obstacle when I back up... ahahah this truck is a riot..

 

[Bozknight55]

2020 Limited doesn't have option to have fixed lines. The bendy lines throw me off and want the option of fixed lines. It is in the manual, does anyone else with 2020 12" UConnect have this option?
The only option under camera is camera delay and camera guidelines on/off and the are the bending lines.