5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2” level and 35 12.50 20x10 with -18 offset on 19 ram with off road package

What kit did you use for the spacers and did you replace the UCA?
 
Any rubbing with that wheel/tire setup? I'm between 20x9 -12mm w/ 35x11.50 orrrr 20x10 -24 w/ 35x12.50. But I'm worried about the extra offset and width leading to too much rubbing.
 
It’s a dealership in Suffolk ny. Browns truck center. They have a local shop do it. 2 inch rough country preload spacer. With that wheel set up they do some trimming. 52828E31-6C33-44DE-8375-4C82F454B9A9.jpegIf you close by the cab you’ll see the trimming.
 
What a difference. How much higher is the off road packageFDC63FAA-822E-40E7-8C9B-6A14A9FB3851.jpeg
 
This is the same wheels and level on non off road package. Way lower. Right?
 

Attachments

  • 45F10FF3-8318-4F8E-927D-53F23C009E38.jpeg
    45F10FF3-8318-4F8E-927D-53F23C009E38.jpeg
    162.2 KB · Views: 102
I wouldn’t necessarily say way lower, personally I think the red looks better, but I would definitely want the upper control arms changed out on the black one with the ORP
 
This is photo of the upper control arm on the black ram with off road package
 

Attachments

  • 9E1B685B-5736-4216-BE67-DB5E03F9A606.jpeg
    9E1B685B-5736-4216-BE67-DB5E03F9A606.jpeg
    123.4 KB · Views: 94

Users who are viewing this thread

Back
Top