PNW1500
Member
- Joined
- May 16, 2021
- Messages
- 15
- Reaction score
- 18
- Points
- 3
- Age
- 37
I'm looking to replace my factory 22" rims with an 18" rim. The wheel I really want is the Black Rhino Chamber. The offset options are +12mm or -18mm. I want the wheel to be flush with the fender, an ever so slight aggressive stance. A tiny bit of poke would be ok, but not a lot.
I'm concerned -18mm will pop out too much and I'm having a hard time finding examples of an 18 x 9.5 -18mm wheel. Does anybody here run a similar setup and have and example I could see? (I've already spent hours on Customwheeloffset)
Also, a 9.5" -18mm wheel has 4.5" of backspacing. A 9" -12mm wheel has 4.5" of backspacing. Does that mean these two setups will look nearly identical in terms of how it sits with the fender?
Black Rhino 18" rims tend to come in a width of 9.5" with a -18mm offset, while Fuel 18" rims tend to come in a width of 9" with a -12mm offset. I'm curious if these setups look the same.
I'm concerned -18mm will pop out too much and I'm having a hard time finding examples of an 18 x 9.5 -18mm wheel. Does anybody here run a similar setup and have and example I could see? (I've already spent hours on Customwheeloffset)
Also, a 9.5" -18mm wheel has 4.5" of backspacing. A 9" -12mm wheel has 4.5" of backspacing. Does that mean these two setups will look nearly identical in terms of how it sits with the fender?
Black Rhino 18" rims tend to come in a width of 9.5" with a -18mm offset, while Fuel 18" rims tend to come in a width of 9" with a -12mm offset. I'm curious if these setups look the same.