18” Aftermarket Wheels that fit?

[outdoorco75]

Great thanks, I like the look. Those wheels make the tires look bigger. I’ve been trying to find a set of Rebel wheel and tire take offs and not having any luck. They are either asking too much money for them, aren‘t willing to ship, or just flat out won’t even return my calls or messages. So I’m thinking of going aftermarket wheel route with the same tires.

Are you looking for the blacked out version? I am considering selling just the wheels if that is of interest to you, shipping may be expensive as I live in Colorado.

 

[Finn5033]

Are you looking for the blacked out version? I am considering selling just the wheels if that is of interest to you, shipping may be expensive as I live in Colorado.

Thanks but no I was actually wanting the black and machined ones. I already bought a set of aftermarket wheels though.

 

[antwon412]

Can you share a photo looking at the front of the tuck? I am curious how much +1 sticks out of wheel wells if at all.
Thanks!

This is all I have at the moment.

 

[Finn5033]

Confirmed my wheels do fit. Showed up today and I test fitted one. Decided to go with the Kanati Trail Hog in a 275/70/18 Getting mounted up on Wednesday. I’ll post some picks once I get them on the truck

Got the wheels and tires on, not sure if I like them or not yet. But here are some pics.

 

[outdoorco75]

Got the wheels and tires on, not sure if I like them or not yet. But here are some pics.

What wheels are those?


Sent from my iPhone using Tapatalk

 

[Finn5033]

What wheels are those?


Sent from my iPhone using Tapatalk

18x9 18MM offset. I’m a little ticked because I thought the wheel would have exposed lugs like the picture shows, so I ordered chrome lugs to go with because I though that would look nice since I have chrome badges on my truck. Then the wheels show up and I see that the the center cap covers the lugs because they are pre drilled for multiple bolt patterns. I’m not sure I like them yet but my buddies and wife like them so hopefully they’ll grow on me.

 

[bobgnarley]

Following up, my wheels arrived and were installed on Friday. The tire shop had no issue mounting them and the rims made it convenient for them to use adhesive lip weights on the inside edge of the wheel to easily clear the calipers. I'm so very stoked on the look which provides a bit more concave and just the right amount of lip. They are mounted on BFG K02 285/65, which is just under 33". When I end up replacing them I'll probably go with the same tire, but with a 305/65 or possibly a 34x12.5 to fill in the wheel wells a bit more.

XD 143 RG3 in 18x9 +0 in satin black:

I have the XD 143 RG3 on order from my local tire shop and XD's site says they will fit the 5th gen RAM. They should be in after the holiday week and I will report back whether they're a fit or not. Already anticipating balancing weight collision with the calipers, but the boys at the local tire shop are bullish and believe that they can make it work. The beauty of buying local is that if they don't fit, I don't have to deal with shipping them back.

XD143 RG3 - XD Wheels

Patent #D897257

www.xdwheels.com

View attachment 74908

 

[Finn5033]

Got the wheels and tires on, not sure if I like them or not yet. But here are some pics.

Well this expirement is going to be short lived. I did a lot of research on these tires and thought I’d be ok with them, but I’m not. They are louder than I’m willing to live with. This is also my first experience with an LT E rated tire and while I could live with the stiffer ride I’m going to avoid that with my new set. The look of the set has grown on me, I thought about just trying new tires but everything in this size is LT rated. And I think it will be easier to sell these as a set than to try and sell the tires alone.

 

[ColoradoCub]

Those Kanatis (never even heard of the brand) look noisey. Don’t think that just because they are LT‘s is why they are noisey. I’ve ran LT’s on every half ton I’ve ever owned and there are plenty of tires out there that are smooth and quiet, just avoid the Uber aggressive ones if you dont want to hear them.

 

[Liam Leen]

Great thanks, I like the look. Those wheels make the tires look bigger. I’ve been trying to find a set of Rebel wheel and tire take offs and not having any luck. They are either asking too much money for them, aren‘t willing to ship, or just flat out won’t even return my calls or messages. So I’m thinking of going aftermarket wheel route with the same tires.

Still looking for rebel take off rims?

 

[ColoradoCub]

Well mine fit!
Fuel Tactic. 18x9 +1 offset

Did you have any issues with balancing weights and the calipers?

 

[antwon412]

N

Did you have any issues with balancing weights and the calipers?

nope. Cleared the calipers fine and I have zero vibration or problems.

 

[coolhandluchs]

I can confirm Icon Rebounds (18x9) fit, no issues. Also running 275/70R18s without issue so far on the stock vanilla coil suspension.

 

[outdoorco75]

I can confirm Icon Rebounds (18x9) fit, no issues. Also running 275/70R18s without issue so far on the stock vanilla coil suspension.

So which bolt pattern and offset did you order?


Sent from my iPhone using Tapatalk

 

[coolhandluchs]

Bolt pattern is 6x5.5, offset is zero.
Icon Rebound Titanium

 

[outdoorco75]

Bolt pattern is 6x5.5, offset is zero.
Icon Rebound Titanium

Thanks. I have a Rebel, I thought the pattern was 6x139.7.


Sent from my iPhone using Tapatalk

 

[coolhandluchs]

They're the same thing, imperial vs metric. 5.5 inches = 139.7 mm

 

[outdoorco75]

They're the same thing, imperial vs metric. 5.5 inches = 139.7 mm

Copy that! Thanks for the education.

 

[packer96]

I've got 18x9 +1 offset Fuel Contras in Matte black with Falken Wildpeak AT3's. 285/65/18. I like them so far.

D616 CONTRA - Wheel Pros

www.wheelpros.com

 

[DerekC]

Following up, my wheels arrived and were installed on Friday. The tire shop had no issue mounting them and the rims made it convenient for them to use adhesive lip weights on the inside edge of the wheel to easily clear the calipers. I'm so very stoked on the look which provides a bit more concave and just the right amount of lip. They are mounted on BFG K02 285/65, which is just under 33". When I end up replacing them I'll probably go with the same tire, but with a 305/65 or possibly a 34x12.5 to fill in the wheel wells a bit more.

Lastly, I have a set of Level 8 MK6 18x9 +0 in matte gunmetal, MINT CONDITION, that I'm selling for a song ($400). DM me if you're interested. But for now, here's a pic of the XD 143 RG3 in 18x9 +0 in satin black:

View attachment 75942

You have a pic you can post or send of the mk6 mounted?