★ Jake's Max Steel HK REBEL 12 ★ Prodigy 18's

[Lize]

Sorry to bring this thread back up, but I have to ask, how do you like the drop in bed liner? I am thinking of going that route instead of a spray in since my truck is leased, and then just removing it before trading it back in.

Will a drop in scratch the truck bed over time and cause problems at the end of the lease? I've never taken one out to check but think a bedbug might be a better option if you want to remove it later. Just a thought, others who have removed liners may be able to advise.

 

[RedRocketZ28]

Will a drop in scratch the truck bed over time and cause problems at the end of the lease? I've never taken one out to check but think a bedbug might be a better option if you want to remove it later. Just a thought, others who have removed liners may be able to advise.

Not sure. I went with a drop in though so we will see. If it scratches it then I guess I’ll leave it in there.

 

[ramButz]

Nice ride! Wow....Great idea on exhaust tip adjustment! Has a custom look! I have Magnaflow cat-back (polished system) on order but I don't think their design will allow tips to be adjusted inward like the OEM setup. I know everyone is thinking "why put polished on a blacked out trim truck when they offer same system in black?" Well, Rebel has so little bling that I figured those long Magnaflow tips might look kinda cool polished along with the Fuel Hardline Gloss black/milled accent wheels. I am planning to paint front tow hooks matching flame red and ordered die cut flame red vinyl decals to go on R A M front letters. It should break up all the black on frontend. I put on the same Mopar mudflap as you but with the 18"x9" +1 Fuel Hardline wheels i needed to trim about 3" of inner portion of front pair for the OEM Goodyear Duratrac 33" tires to clear on turns. They really fit nice. I was promoting them to others but apparently parts of country with severe snowy weather is tough on non flexible designs with deep snow and chunks of ice etc. Here in Portland, Oregon it rarely snows much so they should last. I just added pic of front end with letters and tow hooks finished.View attachment 10183

 

[Gkmathiesen]

Rebel bumper's powder coated

Can you post a picture of these clamps you adjusted ?

 

[19Jake]

 

[Neokane]

View attachment 18907

Drilled extra drain holes?

 

[Gkmathiesen]

loosen the tips clamps
View attachment 13106View attachment 13116

Where are the tip clamps exactly?

 

[BeauxXL1200]

Jake’s Rebel looks awesome. Question to Jake and any others who might know the answer. I’d like to put a black shackle on my receiver hitch like the one in Jake’s pics. But the truck is a tight fit in my garage as it is. Might be two or three inches between the back of the truck and the garage door when the door is closed. And that’s pulling into the garage as far as possible. Does anyone know how much the shackle sticks out from the receiver hitch when installed?

Thanks for any help in advance.

 

[BeauxXL1200]

exactly 2 1/8

Thanks, Jake. I’ll try to measure the distance I have between the garage door and if there’s enough room, I’ll pick up the shackle hitch.

 

[19Jake]

Will a drop in scratch the bed & cause problems at the end of the lease?

non-issue

 

[Gkmathiesen]

clamp's visible below
View attachment 19854

That did it. Thanks Jake.


Sent from my iPhone using Tapatalk

 

[Rebel Yell]

✔ Pendaliner 62031SRX
✔ Gator SFX soft tri-fold tonneau
✔ MOPAR molded splash guards
✔ MOPAR matte black boards
✔ hitch shackle
✔ tuck & center exhaust tips
✔ cover visor labels
✔ front door window tint
✔ disable drivers seat belt chime
View attachment 9452View attachment 18902View attachment 19946View attachment 19945View attachment 18904View attachment 18905View attachment 13111View attachment 19257View attachment 19965View attachment 13112

Your Truck looks awesome! I just got my Rebel 12 in Max Steel last week and loving it so far. I went with the quad cab because I would rather have the extra bed space than cab space for how I plan to use the truck. Like you mine is pretty much fully loaded (no e-torque).
Did I read that you disabled the drivers seat belt chime...how did you do that??

 

[19Jake]

How do you disable seat belt chime?

Buckle up, ignition to run (don't start), let cluster boot up, unbuckle/buckle 3 times. Turn ignition off...chime will sound, mission complete.

 

[Rebel Yell]

Buckle up, ignition to run (don't start), let cluster boot up, unbuckle/buckle 3 times. Turn ignition off...chime will sound, mission complete.

You da man!

 

[19Jake]

bar + 2 shackles...$50 shipped

 

[BeauxXL1200]

bar + 2 shackles...$50 shipped
View attachment 20763View attachment 20765View attachment 20766View attachment 20767
View attachment 20795

Here's mine mounted on the back of the mule, Jake.

 

[19Jake]

 

[rushido1971]

bar + 2 shackles...$50 shipped
View attachment 20763View attachment 20765View attachment 20766View attachment 20767
View attachment 20795

where's the link for this specific anodized one?

 

[BeauxXL1200]

where's the link for this specific anodized one?

Not sure if this is where Jake purchased his, but the Ranger anodized one is on Amazon.

https://www.amazon.com/Extended-Aluminum-Receiver-Shackle-Adapter/dp/B072KLTKPY

I went with this set up, which comes with two shackles and a 30' recovery strap.

https://www.amazon.com/gp/product/B07FL59Y51/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

 

[19Jake]

Hitch bar's an exact match to the anodized Radar Red interior trim.
Great rear view cam focal point, day & night.
Protrudes 2.5" from receiver...bumper protection