Search results

That's the one Cheers

I recently installed the Diode Dynamics hitch mount reverse light kit, and I'm mostly happy with it. It has one serious flaw, in my opinion. The electrical connector is a sealed Deutsch connector, which is great, but when you remove the light to install a hitch, the connector is just left...

No, I don't believe so. The factory pan has a channel in it that the gasket fits into. The B&M pan has no such channel so the factory gasket can't be reused. The PPE pan has the channel and uses the factory gasket, I'm pretty sure.

I considered it but I was really turned off by the cork gasket

Take a look at Car-Part.com--Used Auto Parts Market it's a junkyard aggregator Cheers

Just feed both from the same fuse, they don't draw much current Cheers

The LEDs are replaced too. The factory LEDs are White and Amber, the replacement LEDs are RGB + White and Amber. Cheers

https://www.oraclelights.com/products/2019-2021-ram-1500-projector

In order to get my 18" Rays Gram Lights 57DR-X rims and wheel weights to clear the front brake calipers, I had to shave down the casting marks on the calipers and use low profile wheel weights, which I explain here Cheers

I thought about a set of Volk TE37SB rims but the Gram Lights 57DR-X are very similar visually, nearly as strong, and less than half the price from the same manufacturer. I love this style of wheel, that's why I bought them, but I agree with you about the factory 22s. The extra sidewall is...

Cheers

They were using stick-on weights that were one or two millimeters thicker than the ones that I supplied. Cheers

I recently noticed that lights in my passenger side Rambox weren't working. I diagnosed the issue: the garbage quality switch allowed the entire length of wire from the switch to the first connector inside the Rambox hatch to corrode, with that wire eventually breaking at the first connector...

Update to this. The wheel weights installed towards the back of the barrel were contacting the brake calipers on the front wheels. I did a few things to alleviate this. The first was to shave down the casting marks on top of the calipers I also had my tire shop replace the weights they used...

It looks like the bar you have supports putting a tow ball in the rear bumper. Like Bt10 said, the Mopar hitch should completely replace that bar.

What signal does the 2021 BCM send to the mirror? What protocol is used? Cheers

My 2020 Ram 1500 is my second Ram, though the first was still a Dodge since it was a 2009. I bought the 2020 used, from the owner of a Ram dealership, so it was very well cared for. Cheers

This is the largest size they offer the Discoverer AT3 4S for 18" wheels. Any larger than this would have been an LT tire, which I have no interest in. Cheers

The only thing I didn't love about my 2020 Limited was the wheels and tires. I replaced them today with Rays Gram Lights 57DR-X wheels, in 18x9 +0, and Cooper Discoverer AT3 4S tires, in 275 65 18. I'm very happy with how they look and drive. Cheers

How about a mount for an engine-driven air compressor, based on as much of the eTorque mounting/pulley/belt as possible? That should result in an OEM quality installation for Hemi Rams Cheers