Search results

It’s for the Ram - it’s the BBS TL-A. Hubcentric fit, but it actually necks down at the center cap so the hanger won’t go through.

I purchased a full size wheel/tire to fit my ‘22 limited and ran into an issue installing it. The problem is the center cap hole in the new wheel is too narrow to pass the spare tire hanger through it. Anyone else have this issue? Any ideas to resolve it?

Trailer is right at 6750 loaded. Truck handles it fine. WIth the air suspension it picks it up and levels it back out. No issues clearing the tires so far

I’m debating if I want to either do that or recalibrate the sensors via AlfaODB, which might be the more correct solution as the links should be equal length (same as factory)

Yes, rear is completely stock With just the 1.5” up front. No rubbing at all so far - these are basically 34x11.50, which seem to be the sweet spot. I tow a 7k car hauler when I go to the track. Haven’t had the chance to do that with this setup yet, but I expect it will be fine. Tires are E...

Installed the ReadyLift 1.5” level today. Though the truck sits at different heights from side to side (did so stock as well), but the kit resulted in about 1/2”-1” of rake, depending on where I park it. Two pics as pass side has 1/2” of rake and drivers has 1”

Today I installed the ReadyLift 1.5” lift but utilized Revel Links instead of their brackets. It resulted in 1/2” rake on pass side and ~1” rake on the drivers side. The I’ve measured it parked in the same place and it varies, so the air system seems to be constantly adjusting. Either way...

Yes. All Limited models come with the 4-corner air ride.

Here is my ‘22 Limited with the Revel links set at 1” lift producing 1” of rake. I think I’m going to add the ReadyLift (waiting on USPS…) for the extra .5” and set the links so there’s still rake

I hadn't seen these wheels on a Ram ahead of buying them, so I thought I would post the pics of mine here. I don't care for the fake bead lock look wheels, so specifically wanted something sleek that fit the look I'm after. Truck is a '22 Limited with Night package Wheels are 20" BBS TL-A 20x9...

I ended up ordering the Readylift setup as well. I like the steel spacer vs the Daystar setup. However, I don't like the perfectly level look. My eyes need a wee bit of rake, about an inch or so. I'm hoping that I can either lower the front, or raise the rear slightly to achieve the look...

Your truck looks great! Did you get a full 2” of lift out of it? I‘m thinking I would like to keep 1/2”-1” of rake on mine. To attempt to achieve this, I’m going to get the revel links and try a simple 1” front lift. Hoping that works out without hurting ride quality too much.