Search results

So, is this correct? 40.1 you lose Off road pages and performance pages as well as the tailgate ajar indication? Also, I'm under the impression that you lose your Hopspot function as well? Can someone verify.

I don't seem to be getting the option to control the switch functions from my 12.1UC4 after making the Alpha changes and wiring everything up. 2019 RAM 1500 updated BCM to 2022 firmware. CBC Features: Configuration Aux Switches PTO- SIX SWITCHES LIN & Misc: ASBM Present- YES CustSetMenu 1...

Yes, it's a 1500. That's what I understand that they are is some sort of backup light for trailer use. Do I have to have a trailer connected for them to operate, or do they come on when the truck is in reverse or when in reverse with the lights on? I'd like to make them function, seems like a...

I'm not talking about the puddle lights, those work. The light circled is on the side of the mirror arm, same side as the mirror itself.

I did the conversion from Non power fold to power fold almost everything seems to function correctly. I do have some questions though. 1- The new mirrors are a 4 wire signal with the old mirrors being a 2 wire. Door modules and BCM have been upgraded. The turn signal part of the signal light...

I need a 2022 RAM 4x4 shifter for 5.7l shift on demand with locker rear and hill decent. Is this the correct part number: 68503744AB

It came with my radio I bought from. Here is his Facebook. https://www.facebook.com/robert.loggia.359/

I did not have to repin. I had a jumper harness that did the repin for me.

Questions I'm trying to order a replacement tailgate handle part# 6RN80***AA (replace *** with paint code). My paint code 2019 is PWD I can't seem to find the part with that replacing the asterisks. Is PWQ Tri coat pearl the same as the Pearl white on my truck or do I use a different part...

I have just recently been having a similar issue. Start truck and drive for say 5-10 minutes then Bing Stability Control message pops up on dash and the light appears on the gauges. Will stay on for the rest of the drive. Turn truck off and restart its gone but will pop up again after 5-10...

That's why I was asking what the BCM does for the mirror. Because when I first was testing it, I didn't seem to need the adaptor for it to work, nor did I see a traditional CAN BUS or LIN BUS signal going to the mirror for function after metering the adaptor. I'm not saying it doesn't create a...

I didn't get the one from eBay but it looks identical to what I have. Mine came from Robert at Truck Reboot. I currently have only had one camera connected; the second camera was on backorder. I did notice that the mirror image seems to go up and down while driving forward in traffic. I...

I don't see how because I can unplug this adapter cable and plug the video mirror straight into the OEM harness and it works correctly.

The adapter just seems to power the mirror. The version of the video mirror I have doesn't have the High beam camera on it. I have thought about removing it from the original dimming mirror and adding it to the video mirror. However, the high beam camera has a ribbon strip to send info into...

Need some help, I can't seem to find the answer of figure it out. Swapped my 8.4 for a 12.4 both with nav and XM. Everything worked normal before swap. After swap when you put it in reverse radio does nothing, will just stay on current screen. I can select the backup camera button and it's...

Ironically, I have the same exact issue. Pulled the 8.4 for a 12.4 both with Nav and XM. When you put it in reverse radio does nothing. I can select the backup camera button and it's just a blue screen. However, everything else works fine. If I go in with Alpha and add the Cargo CAM, I...

Here is the bracket. My adapter came with the mirror I purchased from Robert over at Truck Reboot. Honestly from what I can tell about the adapter it's just taking power and ground from the vehicle plug and adding a switched ignition output to it for the mirror. My truck has the dimming...

Well, I installed the mirror (68519222AA) the other day in my 2019 DT and made a bracket to mount the camera (68448640AA) on the rear glass of my Leer Topper. I can plug into the existing harness for my Dimming Mirror with Auto High beams and the Mirror powers on properly with the key. I Also...

Just to verify... The only method currently is using an aftermarket NTSC/PAL camera and tagging into the radio harness video wires? No one has figured out using an OEM Camera with a Fakra connection

NOT <- Ignore typo in last post of mine