What's new
By:
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. theblet

    Turn Signal Fog Light Mod

    Pretty sure the fogs get power straight from the ecu, but I could be wrong
  2. theblet

    Turn Signal Fog Light Mod

    If you have the fog light switch off, one fog will turn on as a cornering light when turning. Then switch off
  3. theblet

    Best Cabin Air Filter?

    Hepa blocks too much air flow for me
  4. theblet

    Will the V6 run all the time?

    Hasn’t someone figured out how to pour a can of electricity yet?
  5. theblet

    Lost all sound out of UConnect!

    Try unplugging the amp that’s under the drivers seat
  6. theblet

    Best Cabin Air Filter?

    I’ve swapped to K&N as well. It’s prob the best air flow besides no filter
  7. theblet

    U11E9 Active Grille Shutter error back again a year after replacing it.

    Yes there’s a plug. If you follow the wire from the AAD motor you will find it. after removing, tape up the plug well and zip tie it out of the way. The grill shutters cycle on startup, but not the AAD.
  8. theblet

    2.5" MOTOFAB LEVELING KIT! PICS!

    I am. I went with the 2” as to not be nose high. Didn’t need to change UCAs as I don’t off-road and my angles look fine. Doesn’t hurt to get some to be safe. And If you do 2.5” or more you’ll prob need to change them.
  9. theblet

    USB and CarPlay doesn’t work when hot outside.

    Sounds like you both need the newer design of the front USB hub.
  10. theblet

    Service Electronic Throttle Control

    Pedal commander is an aftermarket add on.a throttle lag eliminator. You’d know if you have one as it would be installed, along with a control panel for it.
  11. theblet

    What did you WITH your Ram this weekend

    Did they seriously try that hole in a 2wd?
  12. theblet

    Exhaust manifold recall

    I don't actually remember seeing anyone with long tubes on here.
  13. theblet

    Ultimate OBD JScan Thread

    Ok cool. Thanks. I don't have a trailer section so guess I wouldn't be able to use it
  14. theblet

    Ultimate OBD JScan Thread

    It’s not dead. I think we have just done through the most common and useful changes already. Thanks for posting this. Very helpful! When does the check run or do you have to initiate it somehow?
  15. theblet

    Exhaust manifold recall

    Good luck. People have just as much trouble with headers it seems. Poor mating and cracked welds.
  16. theblet

    Leveling kit recommendations

    Depends on your use case. 2” level and highway driving, you’re probably fine. Have your shop check the ball joint angles to make sure
  17. theblet

    Any idea why truck does this

    I’d check that you have a good ground, check the battery, and also inspect your headlight and taillight housings for moisture. Moisture in the lights is known to cause electrical gremlins.
  18. theblet

    Reading Oil pressure from ODB2

    I think I got it. With Jscan, you have to connect to the PCM module and read it from there. I believe car scanner can do it but you have to pay for the pro version. This would help on other makes.
  19. theblet

    Reading Oil pressure from ODB2

    I am trying to read oil pressure from my vlinker MC+. I have Jscan and Car Scanner, but I do not see any graphs/data points for oil pressure. Does anyone know if this is possible? @Jimmy07 Thanks
  20. theblet

    K&N intake

    Aftermarket air boxes do nothing but look cool. Save your money
Back
Top