Search results

We tried but there is no gap at the bottom of the front grille, unlike in the Rebel. Best option would be a light bar behind the lower grill 👍

Hiya, I,am the owner of Dark Dune and yes it's a custom fab I had made. It's actually a 3 piece set that includes a bash plate up front and 2 separate skid plates underneath. Front bash plate is 6mm and skids are 4mm. All made from mild steel (aluminium bends easily). Picture attached. Was...

Hi Y'all 👋 Dark Dune are currently having a sale on their Ditch/Hood light brackets. Fits all 19-22 RAM 1500's, only $97 at the mo. You can view/order them here; 19-22 RAM 1500 Ditch / Hood Light Brackets

Hi Y'all, Dark Dune are currently giving $40 off their 19-22 Ram 1500 reverse light brackets. Final stock clearance, shipping is super quick at 3-5 days! Link; 2019-2022 RAM 1500 Reverse Light Brackets

Dark Dune sell some heavy duty reverse light brackets. They are the only reverse light brackets I've found that anchor at 2 points per bracket so they're pretty rigid. Direct bolt on too, you can check them out here...

Pretty sure Waterfowler_41 is installing SS5s when they ship. He installed Dark Dune brackets a few days ago. You can watch the install here:

We at Dark Dune are about to release a reverse light bracket setup in the next few weeks that will fit all 5th Gen RAMs. The brackets can fit 2×6inch light bars. They are geared towards the offroading style so a quite heavy duty with multiple anchor points. Direct bolt on fitment, laser cut and...

So finally, after many months of testing/fitment, we have front bumper light brackets for the 19-22 Rebel! Laser cut and black powder coated. They have been designed to mount heavy lights such as the Baja Designs LP6 PRO. Check them out here...

Thanks man! Yeh these should be good. Although it does say for 2-4inch rear lifts, and mine is 1.5 inch. However, it would certainly bring it all closer to spec. I do wonder about the Hellwig sway bar. However, with my desert driving I often need more flex/articulation not less. Will look into...

Hi Y'all, Have raised the rear of my 19 Rebel 1.5 inches and would like to keep the rear sway bar in its stock geometry. However, I can't seem to find any extended/adjustable rear sway bar end links. I know Carli make some but $250 is a bit steep. Seem to be a few for the 4th Gens but the 5th...

The information you need to find here is; what is the wheel offset of your current setup (that I assume does not touch any suspension components, mainly your UCAs) and what is the offset of the TRX wheels? Based on this there are websites you can use to calculate if any touching/issues will arise.

Damm!!!!! That's worrying. I've got the FOX 2.5 PE+DSC front and rear on my 19 Rebel. I live the UAE also. I guess these things do happen but that must have some frikin pothole to snap the shaft like that!

No drone at all in the cabin. The Borla ATAK sounds amazing on start up/idle and acceleration. However, it is a loud exhaust and when in cruise control at highway speeds it is also loud compared to stock. It doesn't drone...its just loud. I think if you want a loud rumble at idle and some...

I installed a Borla ATAK and an afe power momentum gt CAI on my 19 REBEL. Could feel and hear the difference. The difference is in torque. You can feel that she accelerates quicker in gear without shifting down. So if your in 8th gear doing 60mph, she will accelerate to 75mph alot easier and...

No wobble in my Rebel. Is it a very high frequency vibration of low frequency vibration? I would definitely get the tires/wheels checked for balancing and alignment. This is the most obvious cause of vibration Could be engine mounts but they shouldn't cause a wobble...more of a single...

Hi, probably looking around the $80-100 mark.

Hi, send to: [email protected] 😊

Ha ha you're in luck, my friend has a 19 Limited so will be developing light brackets for that model/trim too. Just started with the Rebel as that's what I've got. Just send me a quick email and I'll keep you updated 🍻

See pictures attached to a pair of custom fabricated metal light brackets that I designed and had custom fabricated for my 2019 RAM REBEL. The brackets bolt on to 2 bolts (each) that are OEM installed behind the front bumper. No drilling or welding is required. I would assume these would fit...

I installed the afe power momentum gt on my 19 Rebel. Definitely made a difference. Mpg has improved by 2-3 extra miles and has given a bump in torque. It accelerates better in gear without shifting down. It has make the exhaust slightly louder too. Is it worth it. I think so but compared to...