Search results

I also have a 4 Wheel Electronics Aux box, albeit I did purchase used from a forum member. Mine had just standard blue crimp connectors on the ends of the aux leads (not all were used previously). Hard to tell from the picture, but those look crimp connectors with white heat shrink that has been...

@suli Thank you for the great write-up! I ended up buying the switches and relay box/cables from another member who was selling stuff off. So even though I did not build the unit, your posts were extremely helpful to understand how everything worked together. I ended up tinkering around with it...

Good Morning. Went for a drive on the highway to test things out, figured I'd give feedback to close this one out. Both left and right blind spot lights illuminate when there is a vehicle detected Both left and right blind spots give the audible alerts when I turn on the blinker The only...

Thank you to everyone who has posted in this thread, it was very helpful reading through to see what worked and didn't. In the end, I was able to find what I hoped was the right set-up for my truck. Went ahead and tackled this today and it was relatively smooth, no issues and it is ready to go...

I think for what needed to be done, it was the best outcome I could come up with. I did use previous posts from others who also had to splice it in, each took a different approach. This to me had the least amount of cutting but maybe more fine tuning? I cut it bigger and used my Dremel with a...

Happy Veterans Days! I wanted to pass along that the install to gain passive entry went flawlessly this past weekend. Thank you @MayhemMOORE for the original write-up, @Jimmy07 for the quality harnesses and everyone else who contributed both insights and issues! Just a side note, since I have...

Hi all. First Happy Veterans Day! I had some time over the last few days to check over the install (all good) and read through this thread again, this time keying in on posts that are similar or could be relevant to what I saw on Saturday. I went out mid-morning and attempted to follow this...

Tackled this yesterday along with passive entry. Harnesses from Jimmy were top notch! For the parts used, I've included those at the bottom. I am running into an issue though. Everything is hooked up and programmed with Alfa. No issues there. Surround view comes up and I can select each camera...

I may have missed this while reading through this and other threads...Was the termination point for these found? I am currently compiling all the parts needed to tackle a few mods and this is on the list. I have the pins coming in from Mouser this week and plan to pin a couple of barrel...