Search results

You will still need the heated seat/wheel module that is located under the pass seat--even though you only want the heated wheel... -=FM45=-

Just an FYI,,, I believe on the Base 6, the front doors and the 3.5 dash spks are wired together back to the ANC... on the amplified systems they are individually wired to the amp.. If this is old news, just disregard :) -=FM45=-

@brental1 .... I finally got the 2 connectors posted above, the harness isn't going to take long to make but finding the time is--- will update once complete-- -=F45=-

Been a few months, but I added cargo cams to 4 work trucks ... Today I decided to add it to my Ram -- The added view is a plus.. -=FM45=-

More info-- https://5thgenrams.com/community/threads/floor-lighting-to-ambient-lighting.21053/ -=FM45=-

... or use Mopar's site --- https://connectorrepairkit.mopar.com/ -=FM45=-

They are called spats-- https://www.moparpartsinc.com/a/Ram_2019_1500-57L-HEMI-V8-4WD-Big-Horn-Extended-Cab/_51505_7542406/Exterior-Ornamentation/i2379232.html -=FM45=-

Not aluminum-- Got the same extender -- you're good -=FM45=-

Slide Red Lock, push yellow tab and open white lever... -=FM45=-

Mine-- -=FM45=-

You just let me Know and we can meet up and go from there... This is the plug that you re-pinned --- -=FM45=-

@Shives --- that's a new one on me... I have a spare module, tho its a Canadian version, all is working --- I use it to trouble shoot issues that may arise on a customers vehicle... We are in the same state, I believe... before you drive yourself crazy, it's available to you as a test... -=FM45=-

If I remember correctly it's the grn/wht... before you do anything, trace that wire into the tailgate/plug... it should go nowhere.. the new harness for the LED will use that wire as the feed... I cut that wire on the plug side under/behind the bumper and used it as the feed to the new Handle...

Not really sure why you guys are receiving the same errors... yes, you could have a bad module... things to check.. programming of the BCM, power and ground at module, can wires--twisted pair pinned properly and plugged into the proper location - can block... the truck isn't seeing the sensors...

Here-- https://www.mrtruckparts.com/product/tled-bx3rw/ For Parking (Red) I went to rear drivers side Tail light feed, For Aux (White) I went to Tail Gate Led feed.. I added that to my'19... the white will illuminate upon reverse, unlock and opening gate... I was going to go the TRX way but...

Just another idea-- https://5thgenrams.com/community/threads/what-did-you-do-to-your-ram-today.1686/page-1748#post-773893 -=FM45=-

I've got about 99% of the parts for the Rear Heated Seats... my only hold up is 2 remaining connectors, tho a source was located, I refuse to pay their price... connectorexperts.com -- EXP1668 and CET1038BF ... if any members have part numbers from digikey or mouser please do post so we can...

Not a bulb--- it's an LED.. R U trying to change the color or just brighter... Not sure any 'after market' is available.. good luck with the chase.. -=FM45=-

Nice pic Q... You can do it without removing seat, but yes ... removing it makes it so much easier.... Crawl under your truck and locate the main body harness that goes under your seat... it's covered with a plastic shield. I think once you find that, everything should make sense... -=FM45=-

@igolfdou18 --- which connector are you having issues with--- the yellow or the one under the rug of the drivers seat?? -=FM45=-