Search results

I had another model ottocast, the Netflix/youtube worked, but the mirror function never did. Kinda makes me think it isn’t compatible with the truck after reading this.

There is no can bus hub on the 25+ 1500s. Since the canbus architecture is different on the 25+ trucks I don’t think those boards will work for you without some kind of way of sending the signal that the door is opened.

So my pedal commander worked great until it didn’t. When it failed I wasn’t touching it in any way or trying to make changes while driving as suggested, I was driving through a construction zone during rush hour with no shoulders and it suddenly threw the truck in limp mode. Very scary...

Pedal commander uses a t harness at the pedal only for signal and power. Banks uses the t harness at the pedal only for signal. The power is pulled from the OBD connector. The pedal isn’t designed to power any other device so it has been argued that it’s best to have power come from another source.

Pedal commander is not the best choice. I and many others have had failures that put the truck in limp mode and put a check engine and service electronic throttle control message on the dash. Check out the Banks pedal monster. It’s a far better product that has safety features that prevent these...

That is your problem. I had the same issue with mine, pulled it out and never had another issue. I now have the banks pedal monster. Have had zero issues with it. Its a far superior product that has safety features built in that prevent issues like that from happening.

Mine keeps having issues where the CarPlay will display the map, but not the buttons to allow you to pick the music. I have to reset the radio, wait until it comes back on with the bouncing screens, turn off the truck, wait 20 or 30 minutes and then get this screen for another 15-30 minutes...

I only have 1,v6, but yes it’s still on

It may fit as is. I managed to get a 35x12.50 under mine just by trimming about a 1/4” off the back side of the hitch. Your over all diameter is smaller so it may clear without modification.

What is the new version?

Im sure that would be the better solution, im just highly irritated by the fact that i need to perform extra work on my truck to keep the manufacture from messing things up. @RamCares thinks a private message will keep rams issues out of the public eye which angers me even further. Ram just...

And I will say it again. I am out of warranty and still received an ota update that caused these issues. I am beyond angry at the fact that I am being told to take the truck to a dealer and pay out of pocket and be without a vehicle for an unspecified amount of time for an issue that we all know...

Why private message? Let’s discuss the issue openly here for all other frustrated Ram owners to see and contribute. Someone higher up needs to hear how angry this makes people to buy their products and have someone from the company release software that makes the end user experience completely...

@RamCares there will not be a trip to a dealer for me. I’m out of warranty and refuse to give the dealer money for a problem clearly caused by the software update that everyone on here is complaining about. There wasn’t anything fixed by this update, only problems caused, no responsibility...

Mine has been terrible for CarPlay since the last update. The screen bouncing around and not coming back until you shut the truck off and wait is the worst mistake they did in programming. I get in the truck and head out and have no use of the entire system unless I can pull off the road and...

I would be curious if my key programmer could do a “all keys lost” program and then use jscan to program the hub?

Even if it’s just the module and boards, there is a part number for the harness itself, if your asking price and the cost of the harness makes sense maybe we can make a deal.

I had a similar issue with a start stop eliminator I had before I got my tazer. I had the 115v outlet on message, a cargo light symbol, and issues with the radio getting stuck on. By luck I moved the start stop eliminator and everything worked, so I removed it didn’t have any more issues. The...

If you sell the powered ones let me know, I may me interested. I currently have the oem fixed boards, but really want the power ones.

I have the same wheel/tire specs as you but with a 3.5” lift. Mine also rubbed there, but after removing the mud flap and bending the tab back it cleared. It also rubbed there front plastic liner, but that was fixed by drilling a couple of holes and using zip ties to pull it forward out of the way.