Search results

They are two completely different camera systems. Your mirror is the dual camera mirror (it’s been around since 2022 HD Rams). There are two inputs on the back of the mirror- one that goes to the camera in the the third brake light, and one that goes to the single port on the bumper (the tow...

If heated seats turn off by themselves, there’s an issue.

No fuses at all for the trailer light circuits on the 25’s. They are all controlled by the trailer tow module now.

For 2019-2024 F12 is for the trailer park lamp circuit. On the 2025’s, F12 is for the front left headlamp module.

Should be all the info you need in the following thread: https://5thgenrams.com/community/threads/no-tailgate-ajar-warning-my22.38541/

No, the dealership can not turn it on. You can do it with alfaobd or JScan. All 2019-2021 trucks just need alfaobd or JScan to enable the warning. All 2022-2024 trucks that came from the factory without the warning need alfaobd or JScan to enable it, AND need the correct passenger tailgate...

Try running the abs initialization procedures. All info on that is in the following thread: https://5thgenrams.com/community/threads/how-to-add-adaptive-cruise-control-lane-assist-fcw-auto-hi-beam-to-ram-1500.30924/

Most of the work is done through the wheel well (easiest to remove the liner, but not necessary), and through the top of engine bay. Really, the only thing I do from underneath is pull the wire harness tree off the bracket, and the last bolt off the bracket to pull the module out from...

Try doing a factory reset, don’t set up any profiles, then try reinstalling the map update.

There is no accessory position on the push button ignition switch anymore, like there always was on pre-2025 rams. There is only off, and run. When the ignition is in run (engine not running), then ALL of the systems are on as if the engine were running (hvac system, headlights, etc). When there...

I don’t think any of the 2025 1500’s can be configured for trailer surround view. It seems to be a feature listed in error on the build site. Every 2025 I see online has the AUX 1 and AUX 2 camera keys, instead of Trailer Surround and AUX 2 camera keys.

No, not at this time. You’ll have to have the dealer do it.

Did he add the sales code and run the proxi alignment? They probably won’t work until then. Is your odometer flashing?

It’s never really been addressed, but another harness would need to be built for it. I would need you to look at some connectors to see if any/how much of the wiring for it is present. Is there a 10 amp fuse present in F41 of the engine bay fuse box?

Have you driven the truck over 32mph yet? Then try remote starting.

If those settings are set to no in the BCM, then the fault sense wires are disabled. Sometimes the BCM just doesn’t like certain LED lights, and you just have to wire in resistors.

It’s not about forgetfulness, there’s no technology that can overcome that. It’s about having technological backups to the different ways to access and start the vehicle. I think the thought before about the key card was, “what use is this thing if you have to get it out of your wallet, hold...

The digital key card may seem useless at the moment (because if you have the fob in your pocket, then why would anyone want to physically pull out the card and use it). But he’s explaining that once SPAAK becomes available and working, THAT’S when the key card becomes relevant, because it will...

Try shutting the fault sense circuits off: CBC Config I/O Usage: Left Front Lamp Diagnostics Present - Pin F25- NO CBC Config I/O Usage: Right Front Lamp Diagnostics Present - Pin F28- NO

Yes.