Search results

I did have the crossover on the pioneer gm-d9705 set at about 300hz and the gain was set about 1/3 of the way lol.

I also have the alpine system and I also installed infinity ref 3032cfx and 9623ix at first. But once I put them to an aftermarket amp, they could not handle the extra power. Especially the 3032cfx being only 25 watts rms, I had the 9623ix's powered with about 85 watts and they're supposedly 100...

Just swapped out a Kicker 46L7T124 for 2 Skar Audio SVR-10D2

Yes, that would be your best option, rather than to try to improve the factory sub.

Finally completed making my sub box, got the new pair of 10s installed. I just swapped them in exchange for the single 12" L7T.

That's what they are gonna get connected to 1st, Pioneer GM-D9705, to break them in a lil

I got my new Skar Audio SVR-10D2's in earlier today, $192 for the pair. Going to connect one to each EX5 amp at 1 ohm each for a total of 1600 rms wattage (rated). It's gonna be a while till I installed everything, I'm going to make my own box.

I got my new Skar Audio SVR-10D2's in. It's gonna be a while till I install everything, especially because I am going to make my own box. I didn't like what was available either.

I recently purchased 2 of the Massive Audio EX5, 5 channel amp. At 1 ohm it's rated for 800 watts rms. I have yet to install them so I cannot say that it is as advertised. But he's the link, was the cheapest I could find. Also there is an additional 10% off on sale price...

Yes they are a good choice over stock but that's it

Yeah that's what happened lol. I had them wired to the Pioneer amp, rated wattage @ 4 ohm is 75 and 2 ohm is 100. So I figured it would be about 80 watts for the Infinity's since they're in between but somehow they still couldn't take it.

I had Infinity reference speakers in the doors and dash previously, but after I amplified everything, they all eventually blew out lol.

Down the road, I plan to swap out the amps to 2 Massive Audio EX5 amps and go with 2 10" Skar Audio SVR-10D4. I like how the single 12" sounds but I think I need more low end power. It should be what I'm looking for, 1600 watts rms instead of 600 watts rms.

My truck came with the 8.4" non nav alpine system so I went with the Rockford Fosgate DSR1 for stock integration. For the door speakers I went with Skar Audio FSX65-4 for the fronts and Kicker 46CSC9634 for rear. In the dash corners and rear headliners I put PRV TW350TI-4. And I made a custom...

Yes I put 3/4" mdf wood but later I went back over it with sound deadener to keep it from rattling

I mounted mine on the rear of the cab. I removed the single seat in the back. Mine is crew cab but it should be the same.

I'm just going to add from my experience, do not get the Infinity ref 3032cfx for the dash or Infinity ref 9633ix for the doors. Especially if you do plan to try to run them off an aftermarket amp. They did not handle much power.

Yes you can use 6.5" speakers for the doors, you will just need to buy adapters or make your own, some even have them ready for the tweeters. For integration I used the rockford fosgate dsr1 because it gives you 4 pairs of rca pre outs; Front, rear, sub and spare.

To me that's a waste of time and money, but not mine lol. I would just rather install one time rather than multiple times