Search results

All, I'm in the learning phase as well. So I am sure I have just a regular rear axle in the 4x4 truck with no special gears. So what happens if one were to add the Mopar Friction Modifier fluid when doing the fluid change along with the required rear-end gear oil to a standard ratio, standard...

All Today I changed my tire size using AlphaOBD, my MX+ Code reader, and a cable. I used a GPS program on my phone to check for the speedometer accuracy with the new tires. My factory tire size was 275/55/R20 and I changed it to 275/60/R20. I purchased the Bridgestone Revo 3 All Terrain...

That is exactly the magic wand I plan to use from the superhero tool belt. I am hoping that it will be just that easy or use the tire size you gave earlier of the stock Rebel tire size and be close. If not then I will play with numbers to find the sweet spot. BlueHemi1500

Well thanks all for the most valuable information I have been reading and learning. It has been a 3-week ordeal to get 2 new struts installed, parts have been a problem. As of this Monday, my truck passed state inspection and has 2 new front struts 4 new tires, and a new front-end alignment. I...

Hello All, I have spent the last 3 weeks getting my 2020 1500 Larime Level 1, 47k miles - factory stock except for a few cosmetic mods. (The dealer did not have all the parts and then broke some and had to order more parts.) Last Friday, I was finally able to get the front struts replaced...

Welcome to the club and the forum. There is a wealth to learn from and I have certainly learned/read lots from our fellow owners/users. I have this OBD scanner and also, I have AlphaOBD software (android only or for Apple - JSCAN). I have another cheap OBD reader I use for my Outback only as...

I have read on one of the forums where I am a member that there have been potential problems with rear taillights having moisture, and once that issue was resolved the other problems were also solved. I can not remember which forum or topic I read this information. I read a lot about our trucks...

Question, does RAM make the rubber floor mats for the 2025 model year yet? I have the RAM rubber floor mats in my truck and am glad that my truck, came with them my truck is(Nused). If the rubber mats designed for the 2025 fit as well as the 2019-2024 models, I would recommend the RAM rubber...

I have a Nused 2020 with approx. 47K miles. I have only done routine maintenance, put gas in the tank, and drive with miles of smiles. If the truck meets the needs and the wallet is willing, play, "Let's make a deal." You are the final and only judge. BlueHemi1500

What are the factory sizes of the Rebel tires? I think they are on 18-inch or 17-inch rims. Please let me know the size of the Rebel stock tires are, and I will see what AlphaOBD lists when I get home from the Firestone dealer which is about 10 or so miles. So I should be ok to drive a bit...

Hello all, I am getting new tires this Saturday details are below: Truck 2020 Laramime - Level 1, 4x4, 5.7 non-e-torque, 3.21 rear gears, 5.7 bed - no mods other than a few cosmetics and a few tweaks for Highbeams on and enabled my bedlights with the tailgate down and warning light in the dash...

My truck has almost 48K miles. So far my brakes are fine, I did add some brake fluid about a month ago, and I noted some softness and extra travel vs when I got the truck (Nused). The fluid remains clear and the small amount of brake fluid I added firmed up the brake pedal to where I prefer...

All, My part from Amazon for some reason is no longer available, per the Amazon site. But in the last several months, the parts work well with the better screws I purchased from Lowes. So currently my part is not a valid part to purchase, if it comes back I would highly recommend provided you...

I bought my crew cab Nused last year, it has factory Underseat storage. It works great, it does not lock but I do not use it for anything other than equipment used for hauling items in the bed such as tiedown straps, cargo net, and bungee cords—these items that are not high theft targets, and...

I have the factory rubber floor mats front and back. My truck has the rear underseat storage option. They have ridges on the outside perimeters and do a great job at containing junk and minor amounts of liquids. These rear mats do not cover all the way to the rear wall as you asked, they are...

Wow, gone are the days of just unbolting the pan, getting a new gasket, making sure the old gasket is fully removed, using some gasket sealant putting the new gasket on the pan, bolting up the pan, and torquing the bolts to spec. Just WOW. Well above my tools, and skill level. BlueHemi1500

Maybe spark problems or fuel flow problems are the 2 big things that jump out. Granted there is a mountain of potential in the 2 main topics. I'm sure that if the truck were to visit the repair shop it would return with the dreaded "unable to duplicate," please remit 1 arm, and 1 leg for the...

The horizontal indents are to help in building, a flat floor over the rear wheel wells. Then you have additional space that increases the width of your materials from the 48 inches between the wheel wells, and or build a second level deck to have 2 levels of storage. These can be very useful...

Thank you for your response, now to get approval from the finance department, the hardest step of all as always, is getting the credit approval. :) I saved the link in a tab so, that I can order the parts immediately upon authorization. IHMO everybody should have this rack on their truck...

I have a factory rack. How do you install the new sliders in the rack? I am very interested in obtaining these as I use my rack frequently for tie-downs and have wished for more frequently, these are very handy. Thanks in advance for the advice/help. :) BlueHemi1500