Search results

I’d get a gladiator today if they had them with a hemi.

did you drop voltage with resistor? not too bright ?

I actually just did a set of the icon's, and they ride as good or better than stock, and they carry more weight..really happy with them.

yeah I have some long, slow roads in and out of my neighborhood, and I hated the constant enable / disable feeling. if it weren't for that, I'd probably be fine with it.

non blindspot tails are molded plastic - you can see the recess and make the cut yourself with a Dremel, and then you'd have to add the 5 missing wires inside the taillight..all do able...then the sensors / aluminum backers will drop right in.

I want to try and see if a Jeep Grand Cherokee fob will program..I have a 19 grand Cherokee, and it has passive entry, push button start, remote start, etc, and I'm wondering if that fob will program into a ram. I've taken both fobs apart, RAM and Jeep, and the printed circuit board is...

I've used diablosport i3 and hptuners to disable MDS in the PCM. Hptuners has some specific values you can alter as well, like minimum enable speed ,etc. Both of these options require an unlocked PCM. Once disabled, you can remove the solenoids and install the block offs if you'd like, but I...

You can trim them, because sometimes people cut them into a slant / 45 degree angle so they are more progressive with loads

the sensors are the same, but you'll need the metal back/cover portions have different shapes for left & right. what part you looking for - the sensor, the metal backer, or both? I have a spare sensor if you just need that.

if you wanted to add your own internal LED, you would have to open the door panels and pin the existing mirror connector at the door module - thats where the warning illumination output is located. you could in theory, put your own small LED somewhere on the corner of the door panel, facing...

You can pull the carpet up under the driver seat and see if the body harness connector has the pins populated or not.

I’m thinking bcm is whacky

mines been doing the same thing. I’ve been getting some random errors like stability control, and no bus displayed on the cluster. You seeing any of those ?

I'm also having other issues though, and I'm starting to see them pop up on other trucks..I frequently get service stability system, service trailer brake, service traction control, and a bunch of others, like NO BUS on my odometer...I have lots of U0140 codes (unable to comm with BCM). I'm...

dealer was able to "recalibrate" the ABS module (their words - not mine). I was unable to do so and I tried using alfaobd and obd j-scan.

from what I gathered on the hptuners forums, you would need a different tcm/ecm operating system that supports the features..the truck tcm/ecm OS do not have support for auto stick, just ers (electronic range selection). right now even if you add the paddle shifters, it will just act like the...

Bolts were all tight, and you have to drop the front sway bar to make room to drop the shaft. Still it’s a 2 minutes job for a 15mm socket. I found several people with failed front shafts, some guys have 2021’s with like 2-4K miles. One guy has a rebel and is on his 3rd replacement. Other...

Since it was basically falling off anyway, I just removed it and drove it to the dealer. Couldn’t schedule a Chrysler roadside tow, because they use local contractors and I “wasn’t in distress on the side of the road” and they had a high number of emergency calls.

Basically stock truck with highway tires, 22k miles, and I baby it. We had some snow here, in my driveway, started it up, pushed 4x4, and about a 50 feet later, marbles in coffee can. It’s been working great and smoothly up until now. No idea why this happened. Found some folks on the...

Just to add, I also, added the sensors/wiring, and but have not wired my mirror indicators yet..I also had an error that system was unavailable..I disabled the mirror present, and my system has been working perfect..I get a beep when I put blinker on and vehicle is there, also when backing out...