Search results

Use JScan instead if you want to pull the PIN and program fobs.

Depends when you made the backup file. The only way your alfaobd changes can be reverted at the dealer is if they perform the “restore vehicle configuration” function. There is really no reason for them to do this unless they are replacing the BCM. This procedure is exactly the same as when you...

You have to have the traffic sign recognition feature, and you don’t get that until at least a Laramie with advanced safety group.

If you use the factory rear fog light wires, they would both have to be enabled with alfaobd, and you can only activate them with the headlamp switch that has the front and rear fog light button. Alfaobd settings: CBC config I/O: Connector E Pin 39/Connector F Pin 5: Rear Fog Lamps Output...

https://a.co/d/6muB5e7

That’s the behavior when the gateway is not bypassed. Do you have a bypass installed when making that change?

Change HVAC configuration to dual zone ATC, then reboot the radio twice in a row.

68583503AE Is actually not used in 2024 trucks, it’s incorrect info on the parts sites. I ordered that one thinking it was for a 2023, installed it in our 2019 and it wouldn’t fire up. I got it to work because I figured out it was configured for Atlantis architecture, and had to change it to...

What @Cbty2050 said above. Flashing odometer usually means it needs a proxi alignment performed.

I checked a 21 and 23 1500 bcm on the bench, and they do broadcast the message for the 4 camera setting. It probably doesn’t matter what year bcm you use, it most likely won’t work on a 1500 since the 4 camera DRVM isn’t designed to be in a 1500, and they are still using the regular DRVM through...

Looking to make sure these wires in the positions in the pic below from the install instructions are present:

They’re not even officially revealing the 2025 HD ram until January, so probably sometime towards the end of January.

When you cycle through the camera views,does Split View come up for the side cameras? If not, try setting CBC Config I/O Usage: RVDM 4Camera Config to yes (you’ll have to connect as MY2023 powernet in order to see this setting). That will determine if a 1500 is even capable of using the DRVM 3.0...

That hasn’t been possible since UC5 radios came out in 2022, and it’s not necessary anymore (redundant) because they are always in the upper corners of the screen for quick access anyway:

That’s what i figured. Screen is fine, you just need another radio module.

I’ve seen this before, and it’s probably a radio module that was used for testing. I doubt your radio will take a production update, but you can try. This is the latest: https://drive.google.com/file/d/1eStw5UZyYCfpel5rHJNko2sfiTCWNJp5 16gb USB stick format to fat32. Do not unzip or extract...

Yes, new pcm flashes available to AO part number:

A rebel can’t be equipped with LED tail lights or bi function projector LED headlights, therefore there can’t be a rebel with the animated front or rear lighting feature. It’s just a mistake that they list the animated lights in the level 2 equipment group on the rebel, and the night edition...

Yeah, it’s hard to tell with pics, but they “appear” to be the same size and shape. But, for a dealer to do the headlight and tail light swap, it’d still be a huge undertaking. They would at least have to replace the whole body harness and 2 harnesses in the engine bay as far as I can tell...