Search results

Ma ke sure the working fob is not near the truck when trying to program the new fob, otherwise it may read the old fob and tell you it’s not blank

I did the m1 loaded struts(3.5”) with RC UCAs and a Motofab 2” spacer in the rear and m1 shocks. The UCAs have replaceable ball joints with zerks under the caps that hide them. Listen to what was said above. I had spacers up front to start. Rode terrible compared to what I have now and caused...

Funny thing, mine didn’t show up today….neither did my presets. When these things aren’t so glitchy I love it, just wish it would just be normal

Has anyone found a way of programming a new rf hub ourselves with Alfa or jscan or something else.?The part isn’t that expensive and labor to replace it is straight forward, just the programming seems to be what’s causing the expense

Since you already have the RC lift, they do have RC upper control arms with serviceable ball joints for stock applications. I was told this would work with the 6” lift

Depends on how much you want to spend, but you could buy an interface module that aftermarket alarms use. It would tie into the canbus wiring and provide a negative output when the doors are opened regardless of the dome light being on or off.

Sure every company builds things into the price. I’m just using those 2 as examples of companies that do their research and give something the customer desires and try to offer that rather than push ads. All manufacturers have their own issues, we can make quite a list of our own here. My point...

I think ram has lost focus on this for sure. Nobody like adds, especially when we already paid a fortune for these trucks. Spend the time on fixing known issues instead of adding nonsense. Ford and Subaru have an app that is given for free that locks/unlocks/remote starts for free, ram gives you...

I was also considering myself one without issues, but like they say” it’s not an issue until it is an issue”. In this case I consider it way to dangerous to use because it can fail at anytime and leave you in a bad situation. I can only imagine if it was anyone else driving my truck what could...

Well after all the warnings I’ve seen on here my pedal commander died on me in the worst situation. Driving on the highway in a construction zone during rush hour with no shoulder to stop on. Every light on the dash came on and I lost all throttle response. I didn’t know what was happening so I...

So I copied that from something I found here. Obviously you know better, what is the correct part number he should be looking for?

Found this:

I went with the v6 for mileage and cost of the truck. I then got the “itch” to make it look like a truck. I now get mid 16s for mpg, but at this point it’s worth it just for the look. Wish it was a hemi, but for what I use it for it works

Mine appeared the same time as this: kinda weird that I’m getting updates on the 12.1 that I put in in place of the original 8.4. The same day this happened I lost my performance and off road pages too.

I just jacked up the rear from under the axle and then set the jackstands on the frame so the tires where just off the ground when I removed the jack. Swapping the shocks was simple other than the top bolt on the drivers side because there is less access around the filler neck. It took und wet...

6 speaker base audio in a truck with v6 has no amp, no anc.

I run 20x10 -18 on mine with 35x12.50 tires with a 3.5” lift. It required a little bit of mod to get rid of the minor rub I had, but now I have zero rubbing

It can be made to fit. I was able to get my 35x12.50 bfg ko2 on a 10” wide rim in the stock location, but I had to trim about a 1/4” or so off the back of the hitch. Basically trimmed right up to the weld. Without trimming it forced the tire to rub the trac bar and every time the truck moved...

This was sent to me and it worked:In alfaobd, go to CustSetMenu 1: Navigation Turn-by-Turn CSM Present- YES. Reboot the radio twice by holding power down about 10 seconds and the option should show up in settings. Mine is working now with native gps and apple maps as well. Thanks to @Jimmy07

Mine have the angle as part of the link itself. The top and bottom only have a washer and nut as loose parts not connected to the link itself when installing