Search results

The horn has a 3 stage setting. Push softly, i's normal, push a little harder it is louder, slam on the air bag and it sounds like a train horn.:LOL:

Don't know the oem part number, but they will charge you an arm and a leg. You can get them on e-Bay for cheap...

No need to change the air bag with a new steering wheel. I installed a new steering wheel and installed the original air bag back in.

About 6 posts above yours, he stated all the part numbers you need. Pay attention and read.

The door switch is inside the door, located on the door latch. Need to take the door panel off and check the wiring and/or the latch itself. To replace it, you have to remove both door panels, the outer and the inner, not bad but time consuming.

Google says 68502233AA

Wow, most on here lose 10mm sockets like crazy. You lose a 18mm, that's weird. :giggle:

There is no going back, unless you can find a radio module with a software prior to 39.7

I don't know what software he is running, but the pages stop working with the 39.7 update if the truck did not came with the pages enabled from the factory. G-force pitch and roll should be in the Airbag module, I think.

If those DATA show up on the UC4 screen, then they are available from the ECU and BCM. Showing them on the DIC is another issue.

Have a read here. You can do it yourself and update to 40.1 https://5thgenrams.com/community/threads/pr40-1-update-file.48835/#post-709322

I put one on my 2019 Big Horn, fits just fine.

Those options need to be turned on in the BCM. Also, the mirrors from e-bay stating blind spot, they may have the glass with the triangle but no LED in them. Also, they all have the control wire going to the door control module missing. The wire can be added easily. Black connector, pin 7 signal...

It will solve the issue with the mounting rail sitting flush with the bed and you still be able to use the silver rails. The gap between the rails and the bed is another issue, which you can solve with a decent weather stripping.

Painted plastic...

Put some shims under those 3 blocks on each side to bring them up 1/8 of an inch.

Pinout for what? What truck? What year? What Trim? We do have a search function you know.

There should have been the cable from the console. It is a USB plug that was plugged in the console's media hub.

Quick question, is there a way to use the single input mirror to hook up a second camera with a Farka switch to select either camera? Should be doable.

Lowered to $1100. Need those gone.