What did you do to your Ram today???

[boogielander]

You probably know this but if not you can buy the wireless charger. I mean the actual coil part and just put it behind where the factory unit would be.

true, but then the that will require removal of console to replace it and i got my switch pro mounted there.
but that gave me an idea lol
does ANYONE have a stock wireless charger console that's just sitting there not doing anything lol

 

[RAM REAPER MAN]

I picked this up today for $45. I have no idea of brand or anything but for the money I think I can my money back when I'm done with it. Any idea of brand?
I did pick up a new ratchet the other day and I started making my reverse wire extension thing. Even with tools wire etc. I'm way under the price of the vice version.
I'll be making 3 of them to help out others if needed. Don't tell boogielander about the switch panel its temporary for now but we had a long discussion about it in the past.
I already have the oem upliffter switches and harness that I'll be using for my permanent switches.

 

[boogielander]

View attachment 213041View attachment 213044View attachment 213047
View attachment 213053
I picked this up today for $45. I have no idea of brand or anything but for the money I think I can my money back when I'm done with it. Any idea of brand?
I did pick up a new ratchet the other day and I started making my reverse wire extension thing. Even with tools wire etc. I'm way under the price of the vice version.
I'll be making 3 of them to help out others if needed. Don't tell boogielander about the switch panel its temporary for now but we had a long discussion about it in the past.
I already have the oem upliffter switches and harness that I'll be using for my permanent switches.

HAHAHAHAHA
it's chinese off brand, not even auxbeam.
i see Baja Design box though...

but regardless, if you're running anything that is high draw, use relay harness, even when you're wiring it to the OE upfitter switches.

 

[RAM REAPER MAN]

HAHAHAHAHA
it's chinese off brand, not even auxbeam.
i see Baja Design box though...

but regardless, if you're running anything that is high draw, use relay harness, even when you're wiring it to the OE upfitter switches.

I bought 8/10/12 awg and I have about 15 feet of 2/0 removed from a 750 il BMW.
I also have relays from 40 amp to 200 amp
The Baja Design light is a 30 inch I think. I've got it sold is why I had it out. I bought it used at a good price not thinking it wouldn't be too big.
I think I'm investing in LP6's but I'm not a 100% sure on that. I've looked at thousands of lights and reviews. The Nacho lights are interesting as well. They have too much going on though.
So is there a difference between a Chinese off brand and Auxbeam. I can't see much of a difference but I'm sure you know...
Here is a link to the wireless charger coil. I don't know first hand that it works but I don't see why it wouldn't. It would look cleaner

WIRELESS COIL CHARGING

 

[boogielander]

I bought 8/10/12 awg and I have about 15 feet of 2/0 removed from a 750 il BMW.
I also have relays from 40 amp to 200 amp
The Baja Design light is a 30 inch I think. I've got it sold is why I had it out. I bought it used at a good price not thinking it wouldn't be too big.
I think I'm investing in LP6's but I'm not a 100% sure on that. I've looked at thousands of lights and reviews. The Nacho lights are interesting as well. They have too much going on though.
So is there a difference between a Chinese off brand and Auxbeam. I can't see much of a difference but I'm sure you know...
Here is a link to the wireless charger coil. I don't know first hand that it works but I don't see why it wouldn't. It would look cleaner

WIRELESS COIL CHARGING

i think 20" would fit better, but LP6 is solid choice. I loved my LP6s when I had them but upgraded to LP9 because i was able to sell the LP6 kit with brackets for the costs I pay for LP9 kit lol
but TBH i think LP9 is a tad big for 1500s... or maybe that's just me thinking "what can I run when I move to PW because LP9 is the biggest they got" LOL

there's no difference. those are really from the same factory lol just axubeam slaps a label on them and box them up better. same components, same exact things, same high chance of failure at the most inconvenient times lol

the wireless coil charging thing I was actually thinking just remove the unit, make a "bracket", throw a QI2.2 25W charger in there, and call it a day.
Now I need to buy a whole piece (see picture) just for measurement and test fit. did some price check, seems like lowest I can find is $300 and I am NOT going to do that unless I got people wanting them lol

 

[RAM REAPER MAN]

i think 20" would fit better, but LP6 is solid choice. I loved my LP6s when I had them but upgraded to LP9 because i was able to sell the LP6 kit with brackets for the costs I pay for LP9 kit lol
but TBH i think LP9 is a tad big for 1500s... or maybe that's just me thinking "what can I run when I move to PW because LP9 is the biggest they got" LOL

there's no difference. those are really from the same factory lol just axubeam slaps a label on them and box them up better. same components, same exact things, same high chance of failure at the most inconvenient times lol

the wireless coil charging thing I was actually thinking just remove the unit, make a "bracket", throw a QI2.2 25W charger in there, and call it a day.
Now I need to buy a whole piece (see picture) just for measurement and test fit. did some price check, seems like lowest I can find is $300 and I am NOT going to do that unless I got people wanting them lol
View attachment 213070

I may have one. If you remember I bought that shifter and console from a TRX. I think I gave $200 for it all. I just remember telling myself I had to buy it because I'd never find a deal like that again. I figured when I did the upfitter switches Id install the TRX shifter. Ill look at what I've got later this evening.

 

[boogielander]

I may have one. If you remember I bought that shifter and console from a TRX. I think I gave $200 for it all. I just remember telling myself I had to buy it because I'd never find a deal like that again. I figured when I did the upfitter switches Id install the TRX shifter. Ill look at what I've got later this evening.

sounds good thanks!
if you have one and IF my idea works ill send one to you so you can enjoy 25w of fast wireless charing lol

 

[Dan Houle]

Bought my 2022 Rebel new. Installed a bug deflector on it in 2022, but it cracked & I never really liked the fit, & the clips scratched the paint. So I took it to my local Line X dealer & had them Line X where the bug deflector would go. I also had them Line X the the rocker panels. I also dented the top of my tail gate awhile back, so I popped the dent out, but I cracked the paint. So I had them Line X that too. All in all, pretty happy with it. All comments welcome, good or bad.

 

[boogielander]

Bought my 2022 Rebel new. Installed a bug deflector on it in 2022, but it cracked & I never really liked the fit, & the clips scratched the paint. So I took it to my local Line X dealer & had them Line X where the bug deflector would go. I also had them Line X the the rocker panels. I also dented the top of my tail gate awhile back, so I popped the dent out, but I cracked the paint. So I had them Line X that too. All in all, pretty happy with it. All comments welcome, good or bad.

i like it other than the hood part hahaha.

 

[Dan Houle]

i like it other than the hood part hahaha.

It's all good. May have went a little overkill on the hood. But it actually follows the lines of the hood, that's why I had them do it so far up.

 

[CHeYeNNe71]

Bought my 2022 Rebel new. Installed a bug deflector on it in 2022, but it cracked & I never really liked the fit, & the clips scratched the paint. So I took it to my local Line X dealer & had them Line X where the bug deflector would go. I also had them Line X the the rocker panels. I also dented the top of my tail gate awhile back, so I popped the dent out, but I cracked the paint. So I had them Line X that too. All in all, pretty happy with it. All comments welcome, good or bad.

Looks good, but curious why you didn't go white on the hood?

 

[TNRamGuy]

Respectfully, no.

The number on the tire is the max load carrying rating of the tire itself - which typically far exceeds a half ton truck’s capacity, especially if you are not running a passenger tire (LT or E load range). These pressures would be tooth-rattling overkill.

The yellow sticker is the last to be applied in the manufacturing process and is calculated specifically for each truck by weighing it as it rolls off the line.

But similarly, the pressures shown on the placard reflect the required pressure to support the full GVWR, or in other words is the pressure you want when hauling at full capacity.

Daily pressure can be slightly less.

I agree with this except that we know that ram will play games to ensure that they get milage numbers. I personally run 35 rear, 37 front, had my truck alignment with this pressure. As weather is warming the pressure fluctuating with temperature is very important to driving. Pressure can change about 2# per 10 degrees. So right now on a cold morning my tires are likely in the high 20's

 

[Dan Houle]

Looks good, but curious why you didn't go white on the hood?

I liked the blacked out look. TBH, I didn't even think about another color. I had the smoke hood deflector, so I just went with a dark color like the deflector I had that broke.

 

[Bt10]

I liked the blacked out look. TBH, I didn't even think about another color. I had the smoke hood deflector, so I just went with a dark color like the deflector I had that broke.

I woulda run the line over the front fenders curved to the headlights, but functional nonetheless.

 

[Rock Crawler]

I woulda run the line over the front fenders curved to the headlights, but functional nonetheless.

Kind of like this? It does complete the look a little better.

 

[Dan Houle]

I woulda run the line over the front fenders curved to the headlights, but functional nonetheless.

Now ya tell me.

I did ask him about the area below the headlights, but that's plastic & he said the Line X wouldn't stay on the plastic forever.

 

[pizza_pablo]

Got the Patriot bed liner installed.
Looks and feels great.
Took them about 6 hours.
$625 Orlando area.

 

[Dan Houle]

Kind of like this? It does complete the look a little better.

View attachment 213119

Man, that does look pretty sharp.

 

[boogielander]

It's all good. May have went a little overkill on the hood. But it actually follows the lines of the hood, that's why I had them do it so far up.

oh yeah i can see that!

 

[HemiDude]

Bought my 2022 Rebel new. Installed a bug deflector on it in 2022, but it cracked & I never really liked the fit, & the clips scratched the paint. So I took it to my local Line X dealer & had them Line X where the bug deflector would go. I also had them Line X the the rocker panels. I also dented the top of my tail gate awhile back, so I popped the dent out, but I cracked the paint. So I had them Line X that too. All in all, pretty happy with it. All comments welcome, good or bad.

I think the rockers and the tailgate look pretty good