I need a little help about the Rambox "Jumper Wiring Harness"

[2001gw]

I have a 2021 RAM 1500 Limited with Ramboxes. Shortly after I purchased it (in 2021) the left Rambox started popping open by itself. I unplugged the connector at the latch to stop it from happening. About two weeks later I decided to plug it back in and see what happened. That was 4 years ago. It never popped open again…until recently.

About a month ago it started popping open again. I tried unplugging the connector again for a couple of weeks but the problem still exist.

While searching the problem and solutions on this site, I came across several comments about a “Jumper harness.” I have since ordered and received the harness.

My question is: Do I simply remove the old harness and replace it with the jumper harness and the problem is solved?

Thanks.

 

[UglyMonk3y]

did you figure out how to swap the harness? did it fix the problem?

 

[2001gw]

I'm sure you're going to find this truly sad....I"ve had the harness since June but have not gotten around to installing it!

When I do get "around-to-it", I will update this thread and report the results.

 

[MannyN]

I'm sure you're going to find this truly sad....I"ve had the harness since June but have not gotten around to installing it!

When I do get "around-to-it", I will update this thread and report the results.

Here is one, now install it.

 

[2001gw]