2025 Ram 1500 Current Owners - Discussion, Feedback, and Problems

[70runner]

For those of you interested in amp-research powersteps 76364-01A, Carid has them at $1514. Called to verify stock, went ahead and bought with phone guy who added 5% discount, $1439 + tx, free ship. Received it 4 days later. Like a few others I've read about, motor connectors were reversed, open with door shut, close with door open. Easy fix, pry out blue lock, release tabs above connectors, pull out connectors and reverse. Works perfect now. Toughest part for me was fishing the powerstep harness yellow line through the rubber boot near the steering column (tight space) to mate with the OBD plug yellow line.

Contacted amp-research to ask about a 2025 OBD bypass harness. Said they are working on it.

 

[RamTruckMan]

For those of you interested in amp-research powersteps 76364-01A, Carid has them at $1514. Called to verify stock, went ahead and bought with phone guy who added 5% discount, $1439 + tx, free ship. Received it 4 days later. Like a few others I've read about, motor connectors were reversed, open with door shut, close with door open. Easy fix, pry out blue lock, release tabs above connectors, pull out connectors and reverse. Works perfect now. Toughest part for me was fishing the powerstep harness yellow line through the rubber boot near the steering column (tight space) to mate with the OBD plug yellow line.

Contacted amp-research to ask about a 2025 OBD bypass harness. Said they are working on it.

What’s the bypass harness for?

 

[RamTruckMan]

Has anyone had any reason to doubt the indicated TPMS tire pressure indicated reading?
Thanks in advance

 

[70runner]

What’s the bypass harness for?

To plug in the powerstep OBD connector and retain an open OBD port.

 

[KevInSD]

Just a follow up on my shop visit for my dead battery. They are saying both batteries were bad and the shifter needed replacement. In my mind something had to happen for all of those issues to magically occur at once, but the service desk is less than helpful.

As a follow up, the truck is running good and seems to be back to normal. However, note this message is showing up for the auto start/stop.

 

[RamTruckMan]

I’d go back. Clearly something is wrong