Fox 2.5 suspension system

[Eaglehemi345]

Recently did fox 2.5 inch suspension lift on 2020 ram 1500. Paired with trx wheels and 325/65/r18 falken wildpeak at4w's.
Belltech rear sway bar (BEL-5563)
1994-2002 ram rear sway bar links(zon-D5508)
Bilstein B12 1" lift springs (53297839)
Icon delta joint tubular upper control arms (218550DJ)
Go rhino D64306T dominator extreme D6 side steps
Ksp 1.5 inch wheel spacers
Tires are 2 inch outside the fenders.

Ride is smooth and comfortable . Minimal body roll. Coilovers are set at 3 inches of front lift. Still have some rake. Overall nice setup. Tires do rub at full lock. Had to install 1.5 inch ksp wheel spacers to clear upper control arms. Anything from 1/2 inch to 1-1/2 spacer will be needed to clear trx spec tires and wheels. Depending on preferred stance.

 

[Rebel2022]

Very Nice looking truck. I think I would add some fender flares to finish it off.

 

[H2OMAN]

Recently did fox 2.5 inch suspension lift on 2020 ram 1500. Paired with trx wheels and 325/65/r18 falken wildpeak at4w's.
Belltech rear sway bar (BEL-5563)
1994-2002 ram rear sway bar links(zon-D5508)
Bilstein B12 1" lift springs (53297839)
Icon delta joint tubular upper control arms (218550DJ)
Go rhino D64306T dominator extreme D6 side steps
Ksp 1.5 inch wheel spacers
Tires are 2 inch outside the fenders.

Ride is smooth and comfortable . Minimal body roll. Coilovers are set at 3 inches of front lift. Still have some rake. Overall nice setup. Tires do rub at full lock. Had to install 1.5 inch ksp wheel spacers to clear upper control arms. Anything from 1/2 inch to 1-1/2 spacer will be needed to clear trx spec tires and wheels. Depending on preferred stance.

Very pretty. DO NOT add flares. It is seriously clean without them. Great job.

 

[boogielander]

be sure to read here about how to get the best setting for the adjusters.

Thread 'Fox 2.5 DSC Suspension - A Brief Overview, Procedure, and Review of Proper Suspension Setup'

May 23, 2023

​

There are plenty of suspension offerings on the market for the 5th gen Ram 1500 platform, ranging from cheap to expensive. In this thread, I will be detailing why I chose Fox 2.5 for my build, procedures of installing and dialing in the ride, and a review of the build as everything came together. If you are interested about my background, experiences, and story, you are more than welcomed to visit my build thread here.

​

Parts Used​

• Carli Boxed Upper Control Arms: CS-RAM15UCA-09
• Carli Rear Springs, Rebel HD...

• boogielander
• fox fox 2.5 fox shocks lift lift kit lift size lifted performance shock
• Replies: 31
• Forum: Suspension

• 
• 

if you will be adjusting the knobs for on-road and off-road use, get yourself one of these:

Fox DSC Adjustment Helper Knob

CNC machined helper knob for turning Fox's high speed DSC adjuster. Knob is made from Delrin to prevent damage to shocks. Note: If backordered parts typically ship within 2 weeks.

range-industries.com

that little tool is a god-send and worth every penny!

 

[Fab]

@Eaglehemi345 (and @boogielander)

Wow - just wow. Great looking truck(s). I drive a 2019 that's pretty similar and put 35x12.5's on the stock 22's and suspension. Works fine, bit of rub at full lock, but virtually no sidewall so I'm overly cautious when aired down. I've been looking for the perfect "next" setup and I think I may have just found it in your mods. Thank you!

 

[boogielander]

@Eaglehemi345 (and @boogielander)

Wow - just wow. Great looking truck(s). I drive a 2019 that's pretty similar and put 35x12.5's on the stock 22's and suspension. Works fine, bit of rub at full lock, but virtually no sidewall so I'm overly cautious when aired down. I've been looking for the perfect "next" setup and I think I may have just found it in your mods. Thank you!View attachment 195609

thanks hahaha
just copy my homework. i got the head scratching part out for ya already!
all you need to do is come up with the funds for parts and install. if you're in SoCAl hit me up i can hook you up with both parts and install.

 

[Ready Go]

Very pretty. DO NOT add flares. It is seriously clean without them. Great job.

Well, these actually might give a lil more TRX look....
($599.95 painted to match)

 

[H2OMAN]

Well, these actually might give a lil more TRX look....
($599.95 painted to match)

Uh, Im not mistaking that for a TRX. But, good looking truck.