So after I cleaned the throttle body to address the random drops into neutral, I installed an oil catch can on mine, assuming it must be blow by that made the throttle body dirty. In the past year when I have checked the can, it has been dry and clean. I don't know why my throttle body was dirty. Smarter minds on here might know?Whelp thanks to those who recommended the throttle body cleaning. So far I haven’t be able to duplicate under same driving conditions. I ended up using throttle body cleaner to remove the gunk around the opening and flap. I tried doing it with the tb on the truck and it wasn’t going to well so I took the damn think off cleaned it. I have 66k on the truck and it took a good deal of cleaning. I assume it’s blow by getting on there I wonder if guys that are running catch can are experiencing this? Thanks again for those who shared there thoughts!
Was your can installed properly? Here's mine after 3,000 Miles, almost half full.So after I cleaned the throttle body to address the random drops into neutral, I installed an oil catch can on mine, assuming it must be blow by that made the throttle body dirty. In the past year when I have checked the can, it has been dry and clean. I don't know why my throttle body was dirty. Smarter minds on here might know?
I believe I installed it properly, unless the inlet and outlet are mislabeled on the can? Or is the sintered filter not allowing flow through it?Was your can installed properly? Here's mine after 3,000 Miles, almost half full. View attachment 180055
Welcome aboard. Tell us about your truck, year, miles.I have also experienced the same issue twice. I have only had the truck for 2 months! Joined here to find a resolution to the issue. Seached for TSB's and or recalls. Nothing yet.