Hi everyone, this is my first post, but I have been using the forums to gather information on the 5th gen rams.
I installed the Zone 4" kit over the past weekend in my driveway. After getting an alignment the truck drives great, not exactly the same as stock, but not far off either. With the heaver tires and higher center of gravity, there is naturally going to be a different driving feel than stock, but I would still say it drives very nice. I am running 295/65r20 tires which works out to be a tall 35" and about 11.8" wide. I really wanted to keep the stock wheels, and after researching on the forums I saw enough evidence that a 1" bora wheel spacer would be the solution. Sure enough, the 1" spacer fit perfectly and the voids in the stock wheel were deep enough that I didn't need to trim my studs. I also have the rough country electric running boards which work nice, but I do wish they tucked in better like the amps.
First picture is in my driveway, and last three are in the parking garage at work. I cleared the 7' clearance marker with about 1.5 inches before I would hit (thought this might be helpful info for some).
Next up, after I give my wallet a break lol, will be Body Armor 4x4 Ambush front and rear bumpers.