Recent content by trixdesigns

No issues at all; I do have a leveling kit (front links from airlinksgc and the daystar level kit). I’ve put ~12K miles on it so far including some light towing and plenty of highway and city miles. Definitely get an alignment afterwards. Sent from my iPhone using Tapatalk

So yea.. I took it off, flipped it around and it's parallel now.. so if yours looks like mine did and it's pointing up, it's installed wrong.

Jax here as well. Sent from my iPhone using Tapatalk

Can someone post a photo of theirs installed? Installed it on my 2019 Limited and the U seems to be pointing upwards.. while the stock on a neighbors big horn is pointing down. Sent from my iPhone using Tapatalk

Then you’re doing it wrong or you’ve got a defective cup with a hole in it. Ensure the mirror is warm. Ensure no section of the suction cup goes off the mirror. It does take significant force to pop the mirror out, but you also have to be careful not to go ripping the wires off (they’re on...

I’ve got the 33x12.50r22 so a thicker ply and Discount Tire calculated the PSI at 60. I’ve been running that and it is a bit stiffer than OEM. I’ve been thinking about dropping them down to 50 and see if the ride improves. Sent from my iPhone using Tapatalk

Discount Tire will price match just about anyone. I got them to price match my Ridge Grapplers to SimpleTire. SimpleTire was offering 20% off for new customers they price matched them and DT was also offering a 10% Rebate that I just received. Find the lowest price you can find online (aside...

Use the giant suction cup method. Works great, you don’t rip anything off, and the tool only costs like $4 Sent from my iPhone using Tapatalk

It’s a Limited, so stock Air Suspension (not leveled or lifted and in Normal mode) and yes, 4x4 Sent from my iPhone using Tapatalk

What'd you wind up doing for tire size? I tossed RG's in 33x12.50r22 on my Limited wheels and have a bit of rub, especially in reverse at near full lock. Now I'm looking at trimming or doing a Level...

Ha! Got my Ridge Grapplers 33x12.50r22 on my Limited yesterday. They’re rubbing something (assuming inside plastic wheel liner) when in full lock and reverse. Btw.. your black Carven tips are still holding up nicely. Sent from my iPhone using Tapatalk

With the 2020 Limited picking up a Night Edition now, we should see the black LIMITED badging available through Mopar. Until then, Plasti-dip has been used by many. Sent from my iPhone using Tapatalk

They seem to still be available from the Mopar store? https://store.mopar.com/accessories/2019-ram-1500_all_new_-exterior_accessories-running_board_power/ ^ That link has both Quad Cab and Crew Cab power running boards.

The drone most folks talk about occurs when MDS engages. There’s a resonance that occurs and will drive you mad. Instead of hearing a throaty exhaust it changes and resonates a strange sound into the cab.. it’s not the deep grumble you normally get. Sent from my iPhone using Tapatalk

There’s a setting for that, but you have to take it to the dealer. They’ll buy it and you can get a Nissan Leaf [emoji1787] Realistically though, are you trying to force MDS on all the time or something? I have low mpg, because I drive short distances and sit at lots of lights. Give it 30 min...