Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Looking like adding this into a TRX is easier than the 'normal' trucks. Interested myself - Have a 2022 TRX on order but didn't opt for the advanced tech package... one of those things i'd like but don't really need but if its cheap to add it then why not right!
For ACC its as simple as adding...
^Update on the 'issue' I thought was the CV Axle. It was hard to believe, but it was actually a TPMS sensor that had broken off in that wheel and was just tumbling around inside the tire. Amazing that it still works and was able to be put back together!
On a side note... going to be...
Shouldn’t have said all the problems were over with. New issue with this - Passenger side CV axle is now binding, so now I’m curious if it’s a different part number between an non-ORP truck and the ORP truck. Only took 1700 miles to find the issue, so I imagine it’s not going to last much longer.
I lined that bracket up when I had everything disassembled. I honestly couldn’t see how it would work and not interfere with the sway bar. Glad I didn’t have to use it.
No issues with the sway bar so far. About 1200 miles since it was installed. Max trac relocation bracket wasn’t used on my truck as it isn’t compatible.
Hey guys! Let me start off by thanking you all immensely - if it wasn’t for the forums I wouldn’t have been able to piece the kit together, but it’s done!
Lowering My 2019 Ram 1500 ORP
Turns out it is possible! Also fits with the 305/45/22 tires! I’ll be doing a complete write up about it all...
Sorry for the late delay! Here’s how it aligned. I feel like a moron too... figured out the shaking. Never bothered to check tire pressure from when the tires shop repaired the wheels and mounted the tires. Turns out, having the front tires at 60psi causes a shake 😂 bringing them down to 35 has...
Going to do a full write up on this tomorrow, and hopefully toss a video on the channel about the install on this one. This truck had a factory 1” lift from it so a few changes had to be made to the maxtrac 2/4 drop I used. @Snowman122 Mine aligned fairly well, I can snap a pic of the alignment...
Well... back at messing with the truck. Finally got around to changing it up a bit more. For anyone who is curious, I've been making plenty more exhaust videos for these trucks to try and help people who are trying to make decisions. 3 Different variations of the same truck with the Flowmaster...
Hey Rock Crawler! I’m planning on doing the Maxtrac 2/4 drop on my truck that came with the off-road group. Been quite a challenge to figure out making it work in my truck. Found some maxtrac adjustable (7961) links for it, and grab yourself some airlift bags either for lowered trucks or for a...
I played around with it one day, in preparation for me losing mine. It’s not a hard plastic, it’s pliable. I disconnected the plug for it and ran the truck and had no issues. Either that or I thought of disconnecting the bar from the motor so the motor would still operate but wouldn’t actually...
This isn’t the only “performance” mod I’ll be doing to the truck. I’d like to be able to give some real world data on whether they actually help or not albeit some drag tests or some dyno tests. Will see in the future!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.