Recent content by Rambro23

  1. Rambro23

    2019 RAM 1500 hellwig swaybar

    Thanks! Makes sense I don't have that piece with a non-lifted truck.
  2. Rambro23

    2019 RAM 1500 hellwig swaybar

    What's the silver bracket to the left? I have the Hellwig bar, but not that bracket. Curious to know.
  3. Rambro23

    2019 RAM 1500 hellwig swaybar

    Mine did not.
  4. Rambro23

    2019 RAM 1500 hellwig swaybar

    Reused the stock bolts and mine appeared to be all good (torqued down to 30 ft lbs). Also, be sure the hump on the bar isn’t faced up. See pic below for correct orientation.
  5. Rambro23

    2019 RAM 1500 hellwig swaybar

    Thanks for the heads up! Didn't have gloves, so i grabbed a sandwich bag and placed my finger inside that to protect from getting gunked up. That lube is a mess!
  6. Rambro23

    2019 RAM 1500 hellwig swaybar

    Applied lube inside the bushings and re-torqued to 30 ft. lbs. I should be good to go! Also, if you don’t have gloves around, grab a plastic sandwich bag, put your hands and finger inside and apply lubricant to inner bushings. Great way to get the job done and avoid the mess.
  7. Rambro23

    2019 RAM 1500 hellwig swaybar

    So, no lube between the “U” clamps that bolt to the “D” shaped to poly bushings?
  8. Rambro23

    2019 RAM 1500 hellwig swaybar

    Guess I'll unbolt tomorrow and apply the lube!
  9. Rambro23

    2019 RAM 1500 hellwig swaybar

    May I ask why?
  10. Rambro23

    2019 RAM 1500 hellwig swaybar

    Installed mine today and have a question I don't believe has been covered yet. With the polyurethane bushings, should I have lubed the inside of the "D" pieces before fitting them on the bar? I didn't apply the lube that was supplied because they went on so easily. Now I'm thinking the bushings...
  11. Rambro23

    Laramie sport thread

    Magnaflow catback and a Hellwig rear sway bar (check part number to account for lift) would be my first two adds.
  12. Rambro23

    Steering Wheel Leather

    I'm at 11k and just noticed this as well, has there been any dealer help for you? @RamCares What can you do to assist? This is terrible and unacceptable for $62k!
  13. Rambro23

    Exterior Door Handle

    Curious about the same.
  14. Rambro23

    Black Badging - How to ?

    Just bought the black bezel to replace the chrome factory one, any tips on removing the stock one? Guessing the stock one will take some force to pry up and the clips will break off. Did the new one come with clips?
  15. Rambro23

    Exterior Door Handle

    Tried to pop off with no success, any pro tips?
Top